Upcoming Auctions & Liquidation Sale Event Details, Auctioneers

Event Detail

Click on any image to view larger.

Online Only Auction -- Pelleting Equipment, Metal Fab Auction

OVER 1200 LOTS -- 2-DAY SALE

Multi-Location Auction: Kentucky, Colorado, Texas, and Indiana

Online Bidding Only

Began: Friday, May 01, 2020 at 8:00 AM CDT

Ends: Tuesday, June 09, 2020 at 10:00 AM CDT

Online Bidding Only

Began: Friday, May 01, 2020 at 8:00 AM CDT

Ends: Wednesday, June 10, 2020 at 10:00 AM CDT

Location:  Multi-Location Sale.,  KY, IN, CO, TX


Details

AVAILABLE FOR SALE:  Pelleting & Metal Fab Equipment over 2-day sale!

 

DAY 1: CLICK HERE BIDSPOTTER INVENTORY LINK FOR DAY 1 -- IN & TX Locations -- ENDS JUNE 9th

 

DAY 2: CLICK HERE BIDSPOTTER INVENTORY LINK FOR DAY 1 -- KY & CO Locations -- ENDS JUNE 10th

 

DAY 1 -- Asset List

LOT DESCRIPTION 1 DESCRIPTION 2
1001 Located: Vincennes, IN -- 300hp Munch or Munch like pellet mill with: 2 x110KW, 300hp total hp, feeder, conditioner, force feeder, die, rolls, hoist, lubricator, last running last running wood/heating pellets at 3 tons/hr, $200 loading fee
1002 Located: Vincennes, IN -- 300hp Munch or Munch like pellet mill with: 2 x110KW, 300hp total hp, feeder, conditioner, force feeder, die, rolls, hoist, lubricator, last running last running wood/heating pellets at 3 tons/hr, $200 loading fee
1004A Located: Vincennes, IN -- Sprout 32" 32W400 pellet mill with force feeder, conditioner, and 400hp motor last running fiber pellets, loading fee $200
1005 Located: Vincennes, IN -- Pellet Mill  control panel A, loading fee $50
1006 Located: Vincennes, IN -- Pellet Mill control panel B, loading fee $50
1007 Located: Vincennes, IN -- Blower 7.5kw / 10hp, with silencer built in 2010, loading fee $50
1008 Located: Vincennes, IN -- Plant system control cabinets, loading fee $50
1009 Located: Vincennes, IN -- Plant system control cabinets, loading fee $50
1010 Located: Vincennes, IN -- Modern Counterflow cooler with swivel grid design, top airlock, level sensor, and swivel grid, side access door, legs, and cooler bin, rated at approximately 12 tons/hr, loading fee $200
1011 Located: Vincennes, IN -- Galvanized bucket elevator approximately 16', loading fee $50
1012 Located: Vincennes, IN -- Cyclone with stand, airlock, and ductwork / dampener, loading fee $50
1013 Located: Vincennes, IN -- 30hp blower, loading fee $50
1014 Located: Vincennes, IN -- Product bin for filling supersacks etc. with legs, loading fee $50
1016 Located: Vincennes, IN -- Galvanized bucket elevator approximately 20' tall x 6" buckets, loading fee $50
1017 Located: Vincennes, IN -- Belt conveyor approx. 20"wide x 20' long, loading fee $50
1019 Located: Vincennes, IN -- Live bottom bin with access door, loading fee $200
1020 Located: Vincennes, IN -- U-Trough auger screw conveyor approximately 1' x 15', loading fee $50
1021 Located: Vincennes, IN -- Live bottom bin with access door, loading fee $200
1022 Located: Vincennes, IN -- U-Trough auger screw conveyor , loading fee $50
1023 Located: Vincennes, IN -- U-Trough auger screw conveyor , loading fee $50
1023A Located: Vincennes, IN -- Live bottom bin with access door (connected to 1023), loading fee $200
1024 Located: Vincennes, IN -- U-trough auger screw conveyor, loading fee $50
1024A Located: Vincennes, IN -- Live bottom bin with access door, loading fee $200
1025 Located: Vincennes, IN -- 4 Million BTU burner with Honeywell burner controls John Zink Company LLC MODEL R10-1G-30 built 06/07, loading fee $50
1026 Located: Vincennes, IN -- Hammermill 200hp 160KW, modern teardrop design, Siemens motors, similar to Champion mounted on stand rated at approximately 8 tons/hr running wood chips and fibers\, loading fee $200
1027 Located: Vincennes, IN -- Blower 50hp/37KW, loading fee $50
1028 Located: Vincennes, IN -- Live bottom bin with access door, loading fee $200
1028A Located: Vincennes, IN -- Screw conveyor connected to bin 1028, loading fee $50
1029 Located: Vincennes, IN -- Dust collector on legs with rotary valve, loading fee $200
1030 Located: Vincennes, IN -- Cyclone with stand and airlock, loading fee $200
1030A Located: Vincennes, IN -- Auger that connects under cyclone/airlock, loading fee $50
1031 Located: Vincennes, IN -- Hammermill 200hp 160KW, modern teardrop design, Siemens motors, similar to Champion mounted on stand rated at approximately 8 tons/hr running wood chips and fibers, loading fee $200
1032 Located: Vincennes, IN -- Blower 37kw/50hp, loading fee $50
1033 Located: Vincennes, IN -- Auger that connects under cyclone/airlock, loading fee $50
1034 Located: Vincennes, IN -- Belt conveyor, loading fee $50
1035 Located: Vincennes, IN -- Dust collector on legs with rotary valve, loading fee $200
1036 Located: Vincennes, IN -- Live bottom bin, loading fee $200
1037 Located: Vincennes, IN -- Single shaft shredder, last running woody biomass, cardboard, and fibers, loading fee $200
1038 Located: Vincennes, IN -- Control panel, loading fee $50
1039 Located: Vincennes, IN -- Auger, loading fee $50
1040 Located: Vincennes, IN -- belt conveyor, loading fee $50
1041 Located: Vincennes, IN -- control panel, loading fee $50
1042 Located: Vincennes, IN -- Heavy duty single shaft shredder, last running woody biomass and fibers, loading fee $200
1043 Located: Vincennes, IN -- Belt conveyor, loading fee $50
1044 Located: Vincennes, IN -- Blower, loading fee $50
1045 Located: Vincennes, IN -- Cyclone with stand and airlock, loading fee $200
1055 Located: Vincennes, IN -- Auger with drive, loading fee $10
1056 Located: Vincennes, IN -- control cabinets, loading fee $50
1057 Located: Vincennes, IN -- Auger, loading fee $50
1061 Located: Vincennes, IN -- Knight Verti-Maxx 5042 Feed Wagon, loading fee $50
1062 Located: Vincennes, IN -- CPM 2GA3 vertical cooler rated at up to 15-18 tons/hr , loading fee $50
1063 Located: Vincennes, IN -- Belt Conveyor, loading fee $50
1064 Located: Vincennes, IN -- Blower 50hp loading fee $50
1065 Located: Vincennes, IN -- Bin on stand with conveyor, loading fee $50
1066 Located: Vincennes, IN -- CME counterflow cooler with airlock and pellet screener rated at approximately 3 tons/hr on pellets, loading fee $50
1067 Located: Vincennes, IN -- Pellet mill with feeder, conditioner, and force feeder 150hp, appears to be similar to sprout loading fee $200
1068 Located: Vincennes, IN -- CPM pellet mill  sn 188174, loading fee $50
1069 Located: Vincennes, IN -- blue pressurized tank, loading fee $10
1070 Located: Vincennes, IN -- electrical cabinet, loading fee $10
1072 Located: Vincennes, IN -- U-through auger, loading fee $50
1073 Located: Vincennes, IN -- Control cabinets, loading fee $50
1074 Located: Vincennes, IN -- Pump, loading fee $50
1075 Located: Vincennes, IN -- pellet mill feeder and conditioner for use with cpm pellet mill, loading fee $50
1085 Located: Vincennes, IN -- Cement mixer, loading fee $10
1086 Located: Vincennes, IN -- Pallet with pump and parts
1086A Located: Vincennes, IN -- White box storage shelves with contents, loading fee $10
1086G Located: Vincennes, IN -- welding table with tool chest and contents, loading fee $10
1087 Located: Vincennes, IN -- Table grinder with table and contents, loading fee $10
1087A Located: Vincennes, IN -- 3 pedestal fans, loading fee $10
1087B Located: Vincennes, IN -- 9 pallets of heating pellets, loading fee $10
1087C Located: Vincennes, IN -- Supersack with contents, loading fee $10
1087D Located: Vincennes, IN -- Dolly, loading fee $10
1089 Located: Vincennes, IN -- Bagging station with bagging hopper and JEM ESP Bag scale, loading fee $50
1090A Located: Vincennes, IN -- Gray table with shelves including contents, loading fee $10
1090B Located: Vincennes, IN -- Very long  u trough screw conveyor, loading fee $50
1091 Located: Vincennes, IN -- meadows mills hammermill with blower, loading fee $50
1092 Located: Vincennes, IN -- Green feed wagon, loading fee $50
1092A Located: Vincennes, IN -- Green horizontal tank, loading fee $50
1093 Located: Vincennes, IN -- high efficiency cyclone with stand and ductwork, loading fee $50
1094 Located: Vincennes, IN -- Feeding Conveyor, loading fee $50
1095 Located: Vincennes, IN -- Blower, loading fee $50
1096 Located: Vincennes, IN -- skipped
1097 Located: Vincennes, IN -- Conveyor, loading gee 50
1098 Located: Vincennes, IN -- Feed Wagon, loading fee $50
1099 Located: Vincennes, IN -- Williams crusher grinder SN15600, loading fee $50
1100 Located: Vincennes, IN -- Belt conveyor, loading fee $50
1101 Located: Vincennes, IN -- Briquette machine controls, $10
1103 Located: Vincennes, IN -- blower, $50 loading fee
1105 Located: Vincennes, IN -- Diester screener with hydraulic pump, loading fee $50
1106 Located: Vincennes, IN -- Biomass Briquette Systems LLC Briquetter for biomass briquettes model BP100, loading fee $50
1107 Located: Vincennes, IN -- Roach conveyor with motor, loading fee $50
1108 Located: Vincennes, IN -- Screw conveyor with stand, loading fee $50
1109 Located: Vincennes, IN -- Crown continuous hot air sealer with 1000 watt heaters and adjustable temperature. Loading fee $50.
4000 Located: Tyler, TX  -- REAL ESTATE -- TYLER TX FACILITY
4002 Located: Tyler, TX  -- CPM pellet crumbler / crumb roll model 6x30, SN 136171, powered up a cycled, new belts, good corrugations, load out fee $100 (approximate new replacement cost $30,000)
4003 Located: Tyler, TX  -- Jacobson Commander 2436 hammermill with 200hp motor, built in 1998 appears to be in excellent condition, load out fee $100 (approximate replacement cost $68,000)
4004 Located: Tyler, TX  -- Vibratory conveyor with 1 HP motor, dimension are 18"" width x 24" length, last running wood products into a chipper/hog, load out fee $100 
4005 Located: Tyler, TX  -- Jacobson 1hp 88-8 Laboratory Hammer Mill, load out fee $100 ( approximate new replacement cost $5000)
4006 Located: Tyler, TX  -- CPM Vertical Cooler 2 stage, last running animal feed rated at 3-5 tons per hour of feed, load out fee $100 (approximate new replacement cost $35,000)
4007 Located: Tyler, TX  -- Jacobson P361D pulverizer hammermill teco 1800 rpm 100hp motor, loadout fee $100 (approximate new replacement cost $50,000)
4008 Located: Tyler, TX  -- Smico 11-024 circular screener, single deck with cover, appears similar to sweco, load out fee $100 
4009 Located: Tyler, TX  -- Schutte 2312 300 Hammer Mill with 40hp motor NEW HAMMERS, load out fee $100 (approximate new replacement cost $25,000)
4010 Located: Tyler, TX  -- Smico EE951 rectangular vibratory screener, double deck. load out fee $100
4011 Located: Tyler, TX  -- Jacobson 24214DTF hammer mill 50hp series 2 XLT tear drop hammermill, load out fee $100(replacement cost approximate $50,000)
4012 Located: Tyler, TX  -- Jacobson P-240D Hammer Mill 75hp, magnet, NEW HAMMERS, load out fee $100 (new replacement cost approximately $35,000)
4013 Located: Tyler, TX  -- Jacobson 241DTF 60HP hammer mill, 1/4 screen, load out fee $100 (approximate new replacement cost $35,000) 
4014 Located: Tyler, TX  -- Lundell 1800 250hp cuber with feed auger, setup for running approximately 7/8 paper cubes , load out fee $100 ( approximate new replacement cost $180,000)
4015 Located: Tyler, TX  -- Rotex 21 GP screener, SN R510789, 40"x84" with cover, load out fee $100 (approximate new replacement cost $25,000)
4016 Located: Tyler, TX  -- Rotex 20 series gearbox, R170600R rated at 1.5hp, load out fee $100
4017 Located: Tyler, TX  -- SKIP
4018 Located: Tyler, TX  -- SKIP
4019 Located: Tyler, TX  -- Davis Horizontal Ribbon Blender Super Duty Batch Mixer Model SD20, 90 Cubic Ft Working Capacity, 30HP  SN920219, load out fee $100
4020 Located: Tyler, TX  -- Sprout screener with 3hp motor and drive, no nameplate, last running animal food, loadout fee $100
4021 Located: Tyler, TX  -- Sweco MX60C188SFTL circular single deck screener, loadout fee $100 (approximate new replacement cost $30,000)
4022 Located: Tyler, TX  -- SKIP
4023 Located: Tyler, TX  -- SKIP
4024 Located: Tyler, TX  -- Roskamp 8x12 2 pair stainless roller mill, load out fee $100
4025 Located: Tyler, TX  -- Jacobson 2410-415 wood grinder with 50hp motor SN36638 last running wood chips, load out fee $100(approximate new replacement cost $40,000)
4026 Located: Tyler, TX  -- CPM Master Pellet Mill 20HP, Feeder, Conditioner SN CM338667, New Feed Cone, load out fee $100 (approximate new replacement cost $80,000)
4027 Located: Tyler, TX  -- P-240D Jacobson hammer mill 50hp hammermill, NEW HAMMERS loadout fee $100 (approximate new replacement cost $35,000)
4028 Located: Tyler, TX  -- Jay Bee Model 3B SN26392 10hp hammer mill, load out fee $100( approximate new replacement cost $13,000)
4029 Located: Tyler, TX  -- Jacobson full circle hammer mill 75HP 240D on stand, NEW HAMMERSload out fee $100 (approximate new replacement cost $35,000)
4030 Located: Tyler, TX  -- Jacobson Pulverator approximately 50hp P240D Hammermill, new hammers, load out fee $100(approximate new replacement cost $35,000)
4031 Located: Tyler, TX  -- Champion 250hp hammermill with air base, new hammers, load out fee $100 (approximate new replacement cost $70,000)
4032 Located: Tyler, TX  -- Jacobson P240D Hammermill 60hp, load out gee $100(approximate new replacement cost $35,000) 
4033 Located: Tyler, TX  -- 30hp blower last running with 19x19 counterflow cooler, loadout fee $100
4034 Located: Tyler, TX  -- Bliss EX 1912 TF 20hp hammer mill SN 5247, loadout fee $100
4035 Located: Tyler, TX  -- Sweco triple deck stainless 40" sifter MX40 S6666 LK circular screener, loadout fee $100 (approximate new replacement cost $25,000)
4036 Located: Tyler, TX  -- CPM Master pellet Mill 30hp with feeder and conditioner, loadout fee $100(approximate new replacement cost $80,000)
4037 Located: Tyler, TX  -- Jacobson P-240D hammer mill, no motor, magnet load out fee $100(approximate new replacement cost $35,000)
4038 Located: Tyler, TX  -- Schutte 1080 hammer mill (similar to 1380) rated at 150hp (no motor), load out fee $100(approximate replacement cost $40,000)
4039 Located: Tyler, TX  -- Automatic 900 9x24 double pair roller mill, load out fee $100
4040 Located: Tyler, TX  -- American Pulverizer 9x9 laboratory mill 3hp, for use with Coal, chemicals, and other friable materials loadout fee $100(approximate replacement cost $20,000)
4041 Located: Tyler, TX  -- Schutte model HZF75hp hammer mill with blower, NEW HAMMERS loadout fee $100
4042 Located: Tyler, TX  -- CPM Century 100hp pellet mill SN FR368143, load out fee $100 (new replacement cost over $130,000)
4043 Located: Tyler, TX  -- SOLD / DELETE
4044 Located: Tyler, TX  -- CPM 19x19 Counterflow Cooler with discharge bin, top airlock, loadout fee $100 (approximate new cost $50,000)
4045 Located: Tyler, TX  -- At Ferrell 30hp hammermill, loadout fee $100
4046 Located: Tyler, TX  -- Ribbon blender 20hp, end discharge, approx. 90 cubic ft., loadout fee $100
4047 Located: Tyler, TX  -- Gruendler hammermill 15hp, loadout fee $100
4048 Located: Tyler, TX  -- SKIP
4049 Located: Tyler, TX  -- Sweco SS60 S88 circular screener, single deck with cover 2.5hp motor, loadout fee $100(approximate new replacement cost $30,000
4050 Located: Tyler, TX  -- DEMO UNIT CME SWR Sewing Station with 4.5" conveyor, loadout fee $100r
4051 Located: Tyler, TX  -- Rotex 201A AL MS screener 30x60 single deck self-tensioning screener with aluminum cover, loadout fee $100
4052 Located: Tyler, TX  -- Sweco single deck 24" screener ZS24S44P3 circular screener, loadout fee $100
4053 Located: Tyler, TX  -- JB Raymond style grinder, 30hp Made in 2010 loadout fee $100
4054 Located: Tyler, TX  -- Delumping grinding mill with 3 HP motor, 1735 RPM, (approximate cost $4000) loadout fee $100
4055 Located: Tyler, TX  -- Sweco 48" double deck  model LS-48-66606 circular screener, loadout fee $100
4056 Located: Tyler, TX  -- Champion 3820 hammermill with 200hp motor, loadout fee $100 
4057 Located: Tyler, TX  -- Williams Crusher C32 Hog with 22 Alloy Hammers, 100hp motor, slotted screen, 1" wear plates loadout fee $100r
4058 Located: Tyler, TX  -- SKIP
4059 Located: Tyler, TX  -- SKIP
4060 Located: Tyler, TX  -- SKIP 
4061 Located: Tyler, TX  -- CPM Master with 30hp motor and top feeder, missing door, loadout fee $100 (approximate new cost 70,000)
4062 Located: Tyler, TX  -- High Pressure Screw/Extruder with 15 HP motor, No number associated with this, loadout fee $100
4063 Located: Tyler, TX  -- Sprout 500B pellet mill with feeder/conditioner, rolls and new belts, loadout fee $100(approximate new cost 80,000)
4064 Located: Tyler, TX  -- Sweco MR60S8-8 circular screener - Parts Machine, no motor load out fee $100
4065 Located: Tyler, TX  -- J H DAY Roball 40x84 screener single deck,(like rotex 21 screener) last running wood and paper pellets, load out fee $100 (approximate new replacement cost $25,000)
4066 Located: Tyler, TX  -- Scott 2 ton ribbon blender Model HMA489 SN 8010132 drop bottom, 30hp motor, TDT9 Dodge reducer 48"Wide x 9' Long, 113 cu ft. working capacity, load out fee $100
4067 Located: Tyler, TX  -- West Salem hammermill 4460 last running wood chips, needs motor 300-500hp motor, load out fee $100 (approximate new cost $70,000)
4068 Located: Tyler, TX  -- SKIP
4069 Located: Tyler, TX  -- Rotex model 81 screener - parts machine no gearbox, load out fee $100
4070 Located: Tyler, TX  -- Rotex 70 Series Screener large screener with 10hp motor, load out fee $100
4071 Located: Tyler, TX  -- Rotex model 50 series 5 x 10 screener with wood frames 7.5hp gearbox, load out fee $100
4072 Located: Tyler, TX  -- blower no motor, load out fee $100
4073 Located: Tyler, TX  -- Marion Mixer Serial 5974 approximately 90 cu ft., motor included, load out fee $100
4074 Located: Tyler, TX  -- S.Howes #5 Snappy Screener, Model # 5 SN 115838 single deck screener, needs new vbelts before running load out fee $100
4075 Located: Tyler, TX  -- Rusted Blower - Parts Machine, load out fee $100
4076 Located: Tyler, TX  -- 60" sweco screens/clamps load out fee $100
4077 Located: Tyler, TX  -- 20 horsepower blue blower, load out fee $100
4078 Located: Tyler, TX  -- Blower 40hp heavy duty blades, load out fee $100
4079 Located: Tyler, TX  -- Model 16 blower no motor, rough condition, load out fee $100
4080 Located: Tyler, TX  -- New York Blower 20 GI Fan 10hp blower, load out fee $100
4081 Located: Tyler, TX  -- 15hp blower, beld drive, load out fee $100
4082 Located: Tyler, TX  -- Blower with 15 HP motor, 1800 RPM, 220/440 V, load out fee $100
4083 Located: Tyler, TX  -- Bliss conditioner approximately 24" x 8' , load out fee $100 (approximate new cost $25,000)
4084 Located: Tyler, TX  -- Jacobson Ajacs Hammermill, no main (40-75hp)motor, load out fee $100(approximate new replacement cost $35,000)
4085 Located: Tyler, TX  -- P-240D, load out fee $100
4086 Located: Tyler, TX  -- Jacobson teardrop hammermill model 24226DT, load out fee $100 (approximate new cost $60,000)
4087 Located: Tyler, TX  -- CPM Stainless Conditioner, load out fee $100
4088 Located: Tyler, TX  -- CPM 8x55 crumbler with motor, load out fee $100
4089 Located: Tyler, TX  -- Champion Hammer Mill Model S18115 SN62722, no motor, load out fee $100
4090 Located: Tyler, TX  -- Small Kason Screener, load out fee $100
4091 Located: Tyler, TX  -- Jacobson pulverator, load out fee $100
4092 Located: Tyler, TX  -- Jacobson Pulverator 28865 P240-D, load out fee $100
4093 Located: Tyler, TX  -- Rotex 431 SN, stainless steel single deck screener with stand for use with 40x84 screen, load out fee $100
4094 Located: Tyler, TX  -- Bar Nun Screener double deck aluminum contact frame, load out fee $100
4095 Located: Tyler, TX  -- Rotex 532 GP, 5'x10' split feed machine, no cover, load out fee $100
4096 Located: Tyler, TX  -- Conveyor, Belt 20" Width, 288" Length, 84" Discharge Height, load out fee $100
4097 Located: Tyler, TX  -- Williams Crusher control panel, load out fee $100
4098 Located: Tyler, TX  -- Buhler vibratory screener, load out fee $100
4099 Located: Tyler, TX  -- 25 hp blower, load out fee $100
4100 Located: Tyler, TX  -- Stainless steel air filter, load out fee $100
4101 Located: Tyler, TX  -- NEW BALDOR 3 hp 1760 Rpm New Motor, load out fee $10
4102 Located: Tyler, TX  -- NEW BALDOR 3 hp 1760 Rpm New Motor, load out fee $10
4103 Located: Tyler, TX  -- NEW BALDOR 3 hp 1760 Rpm New Motor, load out fee $10
4104 Located: Tyler, TX  -- NEW BALDOR 10 hp 1770 Rpm New Motor, load out fee $10
4105 Located: Tyler, TX  -- NEW BALDOR 1.5 hp 1760 Rpm New Motor, load out fee $10
4106 Located: Tyler, TX  -- NEW TECHTOP 25 hp 3550 Rpm New Motor, load out fee $10
4107 Located: Tyler, TX  --  NEW TECHTOP 7.5 hp 3520 Rpm New Motor, load out fee $10
4108 Located: Tyler, TX  -- NEW TECHTOP 15 Hp 3540 Rpm New Motor, load out fee $10
4109 Located: Tyler, TX  -- NEW TECHTOP 15 Hp 3540 Rpm New Motor, load out fee $10
4110 Located: Tyler, TX  -- NEW TECHTOP 15 Hp 3540 Rpm New Motor, load out fee $10
4111 Located: Tyler, TX  -- Jacobson 50hp P-240-DTF, SN 32987 load out fee $100
4112 Located: Tyler, TX  -- Champion 11.5 x 44  SN 102387 Hammer Mil, with magnet load out fee $100
4113 Located: Tyler, TX  -- Willliams Metor Hammer Mill 150hp, load out fee $100 (approximate new cost $60,000)
4114 Located: Tyler, TX  -- Jacobson 42226-DTF hammer mill, load out fee $100
4115 Located: Tyler, TX  -- SKIP
4116 Located: Tyler, TX  -- SKIP
4117 Located: Tyler, TX  -- SKIP
4118 Located: Tyler, TX  -- SKIP
4119 Located: Tyler, TX  -- Boss Mixer, SS clad on inside, load out fee $100
4120 Located: Tyler, TX  -- Jay Bee hammer mill, load out fee $10
4121 Located: Tyler, TX  -- Large ducting (C-10), load out fee $10
4122 Located: Tyler, TX  -- Large Ducting (C-10), load out fee $10
4123 Located: Tyler, TX  -- Small Ducting (C-3), load out fee $10
4124 Located: Tyler, TX  -- Misc. Ducting, load out fee $100
4125 Located: Tyler, TX  -- DELETE 
4126 Located: Tyler, TX  -- Stainless screw conveyor, load out fee $100
4127 Located: Tyler, TX  -- Gross wt. bagging scale, load out fee $100
4128 Located: Tyler, TX  -- Prater small hammer mill, load out fee $10
4129 Located: Tyler, TX  -- Misc. ducting and blower fan wheel, load out fee $10
4130 Located: Tyler, TX  -- Bucket Lift, load out fee $100
4131 Located: Tyler, TX  -- SKIP
4132 Located: Tyler, TX  -- Rotex screener self-tensioning parts machine, load out fee $100
4133 Located: Tyler, TX  -- LOT Screener parts machine  and new SS screen pan for rotex, load out fee $100
4134 Located: Tyler, TX  -- 30hp motor 1200rpm 444, load out fee $10
4135 Located: Tyler, TX  -- Worldwide motor 15hp 254T 1800rpm load out fee $10
4136 Located: Tyler, TX  -- Baldor Motor 200hp 1780rpm 445T 460V, load out fee $10
4137 Located: Tyler, TX  -- Westinghouse 50hp 365U 1780rpm, load out fee $10
4138 Located: Tyler, TX  -- Siemens 10hp 1200rpm 256T 230/460V, load out fee $100
4139 Located: Tyler, TX  -- GE motor 7.5hp 1200rpm 230/460V, 254T load out fee $100
4140 Located: Tyler, TX  -- Continental Mark V Roll mixer blender 429 Cubic feet, last blending alfalfa, load out fee $100
4141 Located: Tyler, TX  -- Hopper, load out fee $10
4142 Located: Tyler, TX  -- Jacobson P-240D hammermill rough condition, load out fee $100
4143 Located: Tyler, TX  -- Feed chute, load out fee $10
4144 Located: Tyler, TX  -- Large V Blender, load out fee $100
4145 Located: Tyler, TX  -- CPM 19x19 counterflow cooler, load out fee $100
4146 Located: Tyler, TX  -- CPM double pass horizontal cooler (rusted through), load out fee $100
4147 Located: Tyler, TX  -- Sprout 501H pellet mill last running wood pellets, recently running hardwood pellets at 1.5 tons/hr load out fee $100
4148 Located: Tyler, TX  -- Conveyor, load out fee $100
4149 Located: Tyler, TX  -- Conveyor, load out fee $100
4150 Located: Tyler, TX  -- Sprout cooling tower 375/500, rate at 6-8 tons for cooling pellets, recently cooling wood pellets, load out fee $100
4151 Located: Tyler, TX  -- Champion Hammer Mill 20x22 100hp hammermill, load out fee $100 
4152 Located: Tyler, TX  -- Rotex double deck screener recently running wood pellet, rated at 5 tons/hr, load out fee $100
4153 Located: Tyler, TX  -- Misc. box of rolls and dies sprout pellet mill parts and champion screens feed chutes, load out fee $100
4154 Located: Tyler, TX  -- SKIP
4155 Located: Tyler, TX  -- Redline conveyor, load out fee $100
4156 Located: Tyler, TX  -- Auger conveyor, load out fee $100
4157 Located: Tyler, TX  -- S. Howes ribbon blender mixer 15hp, new bearings on discharge side, approximately 90 cuft, load out fee $100
4158 Located: Tyler, TX  -- Pallet of turn buckles, load out fee $10
4159 Located: Tyler, TX  -- SKIP
4160 Located: Tyler, TX  -- Stainless belly pan for Rotex, load out fee $100
4161 Located: Tyler, TX  -- 20hp Shredder, load out fee $10
4162 Located: Tyler, TX  -- Small Cat forklift propane needs hydraulic lines repair, load out fee $100
4163 Located: Tyler, TX  -- CPM Master pellet mill, motor, base, and gearbox, load out fee $100
4164 Located: Tyler, TX  -- Sprout 9-500 vertical cooler, disassemble for shipping load out fee $100
4165 Located: Tyler, TX  -- Express Scale 115lbs capacity JMDT37D scale/bagger SN109545, load out fee $100
4166 Located: Tyler, TX  -- Buhler vertical hammer mill with 75hp motor, load out fee $100
4167 Located: Tyler, TX  -- Discontinued 4084 CME screener with pulley drive(no motor) load out fee $100
4168 Located: Tyler, TX  -- Discontinued 4084 CME screener with pulley drive(no motor) load out fee $100
4169 Located: Tyler, TX  -- Misc. Pump / valve, load out fee $10
4170 Located: Tyler, TX  -- LOT: Approx. 8 dies and misc rolls, feedcones, stiffener ring for pellet, mill , and a hammermill rotor, coupling and other parts load out fee $100
4171 Located: Tyler, TX  -- Strong Scott 60x24 industrial screener, load out fee $100
4172 Located: Tyler, TX  -- Bucket elevator approx. 3x4 buckets made by Universal
4173 Located: Tyler, TX  -- Belt conveyor 32" x 7' load out fee $100
4174 Located: Tyler, TX  -- Unused CME 25hp blower, requires 25hp motor, generates 7500cfm at 12" static pressure load out fee $100
4175 Located: Tyler, TX  -- Unused CME 25hp blower, requires 25hp motor, generates 7500cfm at 12" static pressure load out fee $101
4176 Located: Tyler, TX  -- Screener inlet tubing, load out fee $10
4177 Located: Tyler, TX  -- dispersion feeder for roller mill, load out fee $10
4178 Located: Tyler, TX  -- Feed chutes, load out fee $10
4179 Located: Tyler, TX  -- Baldor 75 hp motor 1725rpm , load out fee $10
4180 Located: Tyler, TX  -- Lincoln 60 hp 364T 1800rpm motor, load out fee $100
4181 Located: Tyler, TX  -- 2 hp motor, load out fee $10
4182 Located: Tyler, TX  -- 2hp motor 145T, 1800rpm, load out fee $10
4183 Located: Tyler, TX  -- 25 hp 1200rpm GE motor with pulley load out fee $10
4184 Located: Tyler, TX  -- 50 hp motor, 480V 50hp load out fee $10
4185 Located: Tyler, TX  -- 100 hp motor 575V 1800rpm, load out fee $100
4186 Located: Tyler, TX  -- GE 75 hp 1800rpm  motor, load out fee $10
4187 Located: Tyler, TX  -- GE 75 hp, 365T 1800 rpm 230/460V load out fee $10
4188 Located: Tyler, TX  -- US Ekectric 60 hp motor 364T 230/460 1800rpm, load out fee $10
4189 Located: Tyler, TX  -- US Electric 200 hp motor, 447TS  3600rpm 460V load out fee $100
4190 Located: Tyler, TX  -- 300hp motor 1800rpm 460V, 449TSload out fee $100
4191 Located: Tyler, TX  -- 100hp motor1200rpm 440V with 10 groove pulley
4192 Located: Tyler, TX  -- GE 125 hp motor, 445T 1200rpm 460Vload out fee $100
4193 Located: Tyler, TX  -- Bobcat Model 752, currently used, visit facility to see under power, load out fee $100
4194 Located: Tyler, TX  -- Clark 8000 pound forklift, needs head gasket, comes with 4' forks pneumatic outdoor tires, load out fee $100
4195 Located: Tyler, TX  -- Hyster 25000 pound forklift, propane, outdoor tires, come to facility to see under power, currently in use(IN USE FOR AUCTION LOADOUT WILL NOT BE AVAIALABLE FOR APPROX 2 WEEKS FROM CLOSE OF AUCTION) load out fee $100
4196 Located: Tyler, TX  -- Clark 16000 forklift outdoor pneumatic tires , propane, runs, come to facility to see under power load out fee $100
4197 Located: Tyler, TX  -- Caterpillar 3000 pound forklift, propane, cushion tires, currently in use visit facility to see under power,  (IN USE FOR AUCTION LOADOUT WILL NOT BE AVAIALABLE FOR APPROX 2 WEEKS FROM CLOSE OF AUCTION)load out fee $100
4198 Located: Tyler, TX  -- Towmotor forklift, 30k Large forklift was running but wont start, Customer must load
4199 Located: Tyler, TX  -- Large compressor (Mark), load out fee $100
4200 Located: Tyler, TX  -- LOT Misc. Sweco 48" screens and rings/parts, load out fee $100
4201 Located: Tyler, TX  -- LOT: Hammer mill feed chutes, magnet, and parts load out fee $100
4202 Located: Tyler, TX  -- 75 hp motor 1200 rpm, 505 220/440, load out fee $10 
4203 Located: Tyler, TX  -- 100 hp motor Ajax, load out fee $10
4204 Located: Tyler, TX  -- 200 hp motor, load out fee $10
4205 Located: Tyler, TX  -- Dayton 3/4 hp 115/230 1ph 1800rpm 56 motor, load out fee $10
4206 Located: Tyler, TX  -- Dayton 3/4 hp 115/230 1ph 1800rpm 56 motor, load out fee $10
4207 Located: Tyler, TX  -- Allis 3 hp motor, 225 frame, 1800 rpm 220/440V load out fee $10
4208 Located: Tyler, TX  -- Dayton 3 hp motor 230/460V, load out fee $10
4209 Located: Tyler, TX  -- Waukesha sanitary pump assembly with motor, load out fee $10
4210 Located: Tyler, TX  -- Small Baldor motor hp, load out fee $10
4211 Located: Tyler, TX  -- Lincoln 15 hp motor 1750 rpm230/460V, 254T, load out fee $10
4212 Located: Tyler, TX  -- US Motor 3 hp motor 213 3phase 550V , load out fee $100
4213 Located: Tyler, TX  -- motor reducer, 1/2hp load out fee $10
4214 Located: Tyler, TX  -- LOT: Misc. new and used parts including: hammers, rods, and bearings, load out fee $10
4215 Located: Tyler, TX  -- LOT 8 century dies (1/4"), load out fee $100
4216 Located: Tyler, TX  -- LOT: Misc. Sweco type screens approx.: qty 6 - 30", qty 1 - 48" qty 70 - 60", rings approximately qty 6 - 30", 13 - 60" load out fee $100
4217 Located: Tyler, TX  -- LOT: Screens for Bliss 4430 hammermill , small holes approx. 1/16 to 1/8 approximately 48 screens load out fee $10
4218 Located: Tyler, TX  -- Cub Cadet zero turn mower, runs good, 1 year old load out fee $100
4219 Located: Tyler, TX  -- Sprout shaker/screener, load out fee $100
4220 Located: Tyler, TX  -- Jay Bee hammer mill, load out fee $100

DAY 2

 

101 Located in Lexinton, KY -- NEW/Unused Colorado Mill Equipment C10 Counterflow Cooler built-in 2019 with: Bottom discharge bin, rotary level sensor, 15hp blower air system with cyclone and airlock, top rotary valve, adjustable legs.  Rated from 2-3 ton/hr up to 10-12 tons/hr depending on the product, ***NEW COST OVER $57,000***, Laoding fee $300
101A Located in Lexinton, KY -- C10 Control Panel for lot 101, Loading fee $30
102 Located in Lexinton, KY -- NEW/Unused Colorado Mill Equipment RE150 pellet mill with: 200hp motor main drive, stainless steel door with knife post, force feeder, new 1/4 die and rolls, hopper bin, and autolube system. ***NEW COST OVER $120,000***, Loading fee $300
102A Located in Lexinton, KY -- Control panel for Pellet Mill Lot 102, Loading fee $30
102B Located in Lexinton, KY -- Disconnects for 200HP Motor on Lot 102, Loading fee $30
103 Located in Lexinton, KY -- NEW/ Unsed Laughlin Product Conveyor, Loading fee $125
104 Located in Lexinton, KY -- Stainless vertical bin with air cylinder release into tote, Loading fee $200
105 Located in Lexinton, KY -- NEW/Unsed Annex Bratney Z bucket conveyor per drawing replacement purchase cost over $115,000, Loading Fee $100
106 Located in Lexinton, KY -- NEW/Unsed Laughlin Product Conveyor, wrapped in plastic (similar in size to lot 103), Loading fee $125
107 Located in Lexinton, KY -- NEW/Unused Small Pellet Transfer Conveyor, Loading fee $50
108 Located in Lexinton, KY -- NEW/Unused Small Pellet Transfer Conveyor, Loading fee $50
2000 Located in Canon City, CO --  THIS INDUSTRIAL PROPERTY is located just off of Forge Road in southwest Canon City. The property consists of 5.78 business zoned acres, a 56,279 sq. ft., single story heavy industrial building with dual overhead  5 ton cranes, 20x18 Paint Booth, 28x13 Sand Blasting room and a separate 4,922 sq. ft. single story office building for a total building area of 61,201 sq.ft. There is 230/460 electric service to several places in the building.
2001 Located in Canon City, CO --  Pexto Slip Roll Machine 36" wide w/3"rolls, in operation, (can be seen under power at our plant) $100 load fee
2002 Located in Canon City, CO --  Niagra Brake Press HD-55-6-8, 55ton brake, 8ft wide, in operation,(can be seen under power at our plant) $500 load fee
2003a Located in Canon City, CO --  Wysong and Miles Shear, 12 gauge, 96" long, model 1296, 3 phase squaring shear, in operation, no#1296, 8' ft.long cutting surface, 12ga mild steel max (can be seen under power at our plant) $500 loading fee
2003b Located in Canon City, CO --  Powermatic 20inch metal cutting band saw  Model No. 87, disconnecting from power uninstalling and loading fee $500
2003c Located in Canon City, CO --  Plasma table CNC cutting system with Hypertherm Powermax 1000, computer system, approx 5' x 10' table capaple of cutting 1/2 steel, currently under power and in use, recently updated and upgraded.   Removing from power and loading fee $500 
2004 Located in Canon City, CO --  Dayton Drill Press MDL#32566 3/4hp 1/2" chuck, in operation $100 loading fee
2005 Located in Canon City, CO --  Racking with approximately 300 Drive and coupling parts both new and used including pulleys, taperlocks, dodge coupling covers/grids/inputs, $100 loading fee, 
2006 Located in Canon City, CO --  TCM FHG 36NS, 8000lbs forklift with pneumatic tires, propane, 4' forks, 147" lift, SN 46400631, currently in use(can be seen under power at our plant), propane tank not included, Loading fee $100
2007 Located in Canon City, CO --  Delta drill press, missing chuck, runs, loading fee $50
2008 Located in Canon City, CO --  Dayton DC speed control loading fee $50
2009 Located in Canon City, CO --  Craftsman 10"table saw loading fee $50
2010 Located in Canon City, CO --  OTC Enforcer 100 100ton capacity horizontal hydrauclic press/puller used for dismantling gearboxes, portable on wheels, loading fee $50
2011 Located in Canon City, CO --  CPM pellet mill model PM7722-6, year 2008, SN 3A0625 with door and base, no motor but rated up to 300hp, for use with 22.5" die and rolls., recently running agricultural products, rated at 10-15 tons/hr on animal feed, loading fee $500 (approximate new cost $180,000)
2012 Located in Canon City, CO --  Heavy Duty Rolling Table for steel, mounted on wheels, approximately  52"Wx115"Lx30-1/2"H, steel not included, loading fee $50
2013 Located in Canon City, CO --  Sprout Waldon (Andritz) Pellet Mill 26 disassembled for rebuilding, wtih 300hp motor, force feeder, conditioner, rated at approsimately 3 ton/hrs on wood pellets, and 3-5 tons/hr on alfafla (approximate new replacement cost $220,000) loading fee $500
2014 Located in Canon City, CO --  Atlas Copco GA55 Air compressor, $2500 Revomal, Rigging, and Loading
2015 Located in Canon City, CO --  Air tank 8' long x 2'-6" round, $100 loading fee
2016 Located in Canon City, CO --  Skip 
2017 Located in Canon City, CO --  RF12 and R13 insulation on a pallet $50 loading fee
2018 Located in Canon City, CO --  Round screener approximately 40" stainless steel section, never used, no nameplate(similar to sweco/kason), 0.5hp, 1160rpm, 230/460v, $100 loading fee
2019 Located in Canon City, CO --  Round Screener approximately 48" stainless steel section, never used, no nameplate,(similar to sweco/kason)  2.5hp, 1200rpm, 230/460v, $100 loading fee 
2020 Located in Canon City, CO --  Schutte hammer mill 38-13-300 150hp tear drop hammermill, last grinding peanut by products, rated at up to 50 tons/hr on corn (New replacement cost approximately $60,000)  $500 loading fee
2021 Located in Canon City, CO --  Jacobson 75hp 42311 hammer mill, rated up to 25 tons/hr on corn (New replacment cost $55,000)$500 loading fee
2022 Located in Canon City, CO --  Buhler Feeder distributor model# DF AV1 w/2 transition pieces & 4 outlets, $50 loading fee
2023 Located in Canon City, CO --  CPM CL3 SN 387513 pellet mill with stand and feeder, (new cost approximately $50,000), $100 loading fee 
2024 Located in Canon City, CO --  Champion Rotary Pocket Feeder Model 8x28  SN 808160 w/magnet (approximate new replacement cost $15,000)on 2 pallets loading fee $50
2025 Located in Canon City, CO --  Jacobson rotary pocket feeder with motor baffle inlet, w/magnets inlet 17x10 outlet 17x21 loadng fee $50
2026 Located in Canon City, CO --  Rotex 201 gearbox spins freely no backlash, SN R320774, for use with rotex 20 series machines, (new replacement cost approx $5,000) loading fee $50
2027 Located in Canon City, CO --  CPM cooler, Model 1B single stage vertical cooler SN 154499 upadated with new blador motor and cleveland gearbox, last running animal feed at 3 tons/hr, (New replacement cost approximately $20,000) loading fee $100
2028 Located in Canon City, CO --  Blower, no motor or belts, loading fee $50
2029 Located in Canon City, CO --  CPM DS2S empty gearbox sand blasted ready to for use, loading fee $50
2030 Located in Canon City, CO --  new/unused Meadow Grinding Mill steel burr mill, stainless hopper, for use with 5hp motor (new price approximately $4000) loading $100
2031 Located in Canon City, CO --  Lot: 3 CPM Pellet Mill Parts including mainshaft 3020, shear pin outer housing, pinion gear,(nrew replacement cost approximately $16,000) loading fee $50
2032 Located in Canon City, CO --  Sprout Andritz Mainshaft with nut for 26300 pellet mill.(new replacement cost approximately $20,000) loading fee $50
2033 Located in Canon City, CO --  Aftermarket pellet mill gearsfor CPM 7000, require polishing/rework loading fee $50
2034 Located in Canon City, CO --  Kice multi-Aspirator gravity cleaner, product separator, loading fee $50
2035 Located in Canon City, CO --  Del-tec air dryer Model PV-2PS, max pressure 150psi, loading fee $50
2036 Located in Canon City, CO --  CPM 3000 Misc parts including shear pin, quill flange, and mainshaft(new replacment cost approximately $20,000) loading fee $50
2037 Located in Canon City, CO --  Lot: Sprout 21 die housing and sprout deflector, (new replacement cost approximately $25,000)loading fee $50
2038 Located in Canon City, CO --  NEW Colorado Mill Equipment 30hp HMS XL with new 30hp Baldor motor 1 set of hammers, hopper, slide gate, safety switch, no stand, rated up to 10 tons/hr on corn (new repacement cost approximately $9000), loading fee $100
2039 Located in Canon City, CO --  Skip
2040 Located in Canon City, CO --  Schutte 1380 hammer mill, with 150hp motor (new replacement cost approximately $50,000), loading fee $100 
2041 Located in Canon City, CO --  Electric motor 100hp nameplate states 230/460V 405T frame 1775 Rpm, loading fee $50
2042 Located in Canon City, CO --  Marathon electric motor, tag hard to read believed to be 150hp 1800rpm
2043 Located in Canon City, CO --  Teco westinghouse 100hp motor 230/460V 3560rpm 405TS loading fee $50
2044 Located in Canon City, CO --  Ideal Electric motor 75hp 1180 rpm 220/440 505 frame loading fee $50
2045 Located in Canon City, CO --  Leeson Ultimate E 100hp electric motor 405TS TEFC 3575 rpm, loading fee $50
2046 Located in Canon City, CO --  GE 200hp electric 1200rpm 460V 1190 rpm 449T loading fee $50
2047 Located in Canon City, CO --  US electric Motor  100hp 440V 445U 1800p rpm loading fee $50
2048 Located in Canon City, CO --  Baldor motor 150hp 460V 444T 1780 rpm loading fee $50
2049 Located in Canon City, CO --  Champion 3044 hammermill rotor, loading fee $50(has imbalance)
2050 Located in Canon City, CO --  Lesson Ultimate E electric motor 100hp 3575 rpm 405TS loading fee $50
2051 Located in Canon City, CO --  Unused HMA30 hammermill 30hp with blower no motor loading fee $50(new replacement cost $50,000)
2052 Located in Canon City, CO --  LOT: 5 CPM Century main/bull gears, taken from mills cleaned and prepped for future use on a rebuilt pellet mills, appear to be in good condition, no chips, (new replacement cost approximately $30,000-50,000) loading fee $50
2053 Located in Canon City, CO --  new rotor for champion 3044 hammermill purchased new for a hammermill rebuild project that was never completed, (new replacement cost approximately $12,000) loading fee of $50
2054 Located in Canon City, CO --  Circular screener, single ss deck, approximately 30" similar to sweco/kason. tested but never used, w/motor .5hp 230/460 loading fee $100
2055 Located in Canon City, CO --  Skip
2056 Located in Canon City, CO --  Unused CME HMA30 hammermill with new 30hp motor and w/fan loading fee 100(new replacement cost $12,500) loading fee $500
2057 Located in Canon City, CO --  LOT: 2 new Buhler hammermills including: Grinder, rotor with hammers, and spare screens, hopper with slidegate, motor slide plate,  no 5hp motor, Features: full circle grinding, belt drive design, 18 double sided heat treated hammers, rated at 1-2 tons/hr on corn depending on grind/crack size (new replacement cost approximately $5000) loading fee $50
2058 Located in Canon City, CO --  Sprout 21N-Ace Pellet mill SN 1993-0306, 21", not including 200hp motor, recently running alfalfa at approximately 3-4 tons/hr, running when taken out of service, (New replacement cost approx. $500,000-150,000) loading fee $500
2059 Located in Canon City, CO --  Lot: 2 new Lesson 7.5hp 1182rpm 254T electric motor 230/460V, loading fee $10
2060 Located in Canon City, CO --  Skip
2061 Located in Canon City, CO --  Lot: (2) new sporut 21 wear rings and (2) new dies 1/4" x 2.25" effective for sprout 21 sprout pellet mill loading fee $50
2062 Located in Canon City, CO --  Sprout jr Model 500 pellet mill with feeder/conditioner recently running wood pellets, approx 50hp motor, running when taken of service, customer upgraded to larger machine, Ran wood pellets for 5 years (new replacement cost approximately $70,000-100,000)loading $500
2063 Located in Canon City, CO --  CPM stainless steel feeder with drive,(new replacement cost approximately $12,000) loading fee $50
2064 Located in Canon City, CO --  Skip
2065 Located in Canon City, CO --  NEW CME Conditioner stainless steel shell approximately 10" x 5' with steam port, ss adjustable paddles, needs 1.5hp motor,  (new price $6,500) $50 loading fee
2066 Located in Canon City, CO --  New/unused Lesson ultimate E 50hp 3600rpm 230/460 326TS, $50 loading fee
2067 Located in Canon City, CO --  Lesson 10hp, 230/460V 215TC, 3600rpm, $50 loading fee
2068 Located in Canon City, CO --  Box of pulleys, 1 sprout 10 grove 501 pulley, misc 5 groove pullyes, taperlocks including new, used, and unused, etc  loading fee $50
2069 Located in Canon City, CO --  NEW/Unused CME C5 top airlock no drive, (new cost $2900)loading fee $50
2070 Located in Canon City, CO --  USED CME 7" stainless steel auger no drive, (new cost $8,900)loading fee $50
2071 Located in Canon City, CO --  Lesson 30hp 3600 rpm 286TSC 230/460, loading fee $50
2072 Located in Canon City, CO --  Unused WNM 10hp 256T 230/460V 1785 RPM, loading fee $50
2073 Located in Canon City, CO --  Lot of  2 techtop, 1 baldor and 40 to 1 gearbox made by clevelandgear, loading fee $50
2074 Located in Canon City, CO --  Lot of 2 NEW unused CME 9" stainless steel feeder no drive, (new price $9500 each) loading fee $50
2075 Located in Canon City, CO --  NEW Baldor 30hp 3600rpm 256TSC 460V, loading fee $50
2076 Located in Canon City, CO --  NEW Techtop 25hp 3600 rpm 230/460V 284TSC, loading fee $50
2077 Located in Canon City, CO --  New/unused Techtop motors 1 is 3hp 3600rpm 230/460V, 2nd is 25hp 3600rpm, 230/ 460V, $50 loading fee
2078 Located in Canon City, CO --  New/Unused 15hp Techtop 1200 rpm 284T , loading fee $50
2079 Located in Canon City, CO --  New/unused 40hp motor, 324TSC 3600rpm 230/460V, loading fee $50
2080 Located in Canon City, CO --  LOT: CME conditioner, force feeder, feed chute, guards, no motors, (new cost $20,000) loading fee $50
2081 Located in Canon City, CO --  LOT: 3 new/unused R30 conditioners, 10" x 5' stainless stee, adjustable paddle, (new cost $6500 each) loading fee $50
2082 Located in Canon City, CO --  SKIP 
3083 Located in Canon City, CO --  skip 
2084 Located in Canon City, CO --  NEW CME R30 stainless  conditoner, with 2hp motor, (new remplacement cost $6900) $50 loading fee
2085 Located in Canon City, CO --  R30 stainless Conditioner, No Motor with guards(new cost $6500) $50 loading fee
2086 Located in Canon City, CO --  skip
2087 Located in Canon City, CO --  CPM 202 SN 2020-294059 empty pellet mill with mainshaft, quill, and box of additional parts, no motor loading fee $100
2088 Located in Canon City, CO --  skip 
2089 Located in Canon City, CO --  skip 
2090 Located in Canon City, CO --  CPM 7000 empty gearbox with base and crate of parts, loading fee $500
2091 Located in Canon City, CO --  skip
2092 Located in Canon City, CO --  skip
2093 Located in Canon City, CO --  Lot: CPM 7000 Baseplate, stainelss door with dump chute and  7000 1/4" die, loading fee $100 
2094 Located in Canon City, CO --  Sprout 500B Pellet jr mill with feeder/conditioner, missing belts and feed chute, includes approximately 3/16 die and rolls with feedcone, last running in a university, (new replacement cost approx. $75,000-100,000) loading fee $500
2095 Located in Canon City, CO --  CME R30 stainless condtioner  no motor, (new nost $6500) $50 loading fee
2096 Located in Canon City, CO --  Lot: discontinued new stainless gravity feed chutes and force feeder augers, (new cost $15,000) loading fee $50
2097 Located in Canon City, CO --  LOT: 2 discontinued force feeders and R30 conditioner (new cost $11,500)loading fee $50
2098 Located in Canon City, CO --  LOT: 2 stainless screw feeder shells with gearbox, loading fee $50
2099 Located in Canon City, CO --  Sterling 200hp 449TZ 460V 1185rpm eelctive motor, loading fee $500
2100 Located in Canon City, CO --  LOT: 3 gravity bag scales: JEM/ESP type,(new cost approximately $3000 each) loading fee $100
2101 Located in Canon City, CO --  CME 9" stainless steel auger, loading fee $50
2102 Located in Canon City, CO --  Electric motor, reported as 150hp no nameplate to confirm, includes 14 groove pulley, $500 loading fee
2103 Located in Canon City, CO --  Baldor 100hp 1180 rpm 460V 444T loading fee $500
2104 Located in Canon City, CO --  GE 50hp 3560 rpm 550V 365U, Loading fee $50
2105 Located in Canon City, CO --  Candian GE 100hp  1180 rpm 575V 444T loading fee $100
2106 Located in Canon City, CO --  Pacemaker electric motor 125HP 1200rpm 460V 444T loading fee $100
2107 Located in Canon City, CO --  Reliance electric motor 300hp 1785 rpm 460V 449TS loading fee $100
2108 Located in Canon City, CO --  Westinghouse 150hp 575V 447T 1185rpm loading fee $500
2109 Located in Canon City, CO --  Louis Allis 150hp 447US 230/460V 1780RPM loading fee $100
2110 Located in Canon City, CO --  Electric Motor approximately 100 1800rpm? loading fee $500
2111 Located in Canon City, CO --  Baldor 100hp electric motor 405T 230/460V 1760rpm loading fee $100
2112 Located in Canon City, CO --  Allis Chalmers 75hp, loading fee $500, 1170rpm 505 220/440
2113 Located in Canon City, CO --  Techotop 150hp, 460V 1180rpm 447T, loading fee $100
2114 Located in Canon City, CO --  Reliance 75hp, 445U, 1190rpm, 220/440 loading fee  with $500
2115 Located in Canon City, CO --  Clark CHY160B Forklift, SN HY1425-13-1147, Clark states that the lift is rated at 16k lbs but nameplate says 10,500 at 48", outdoor tire, pneumatic, 686 hours, propane, 8ft forks, super heavy duty forklift, runs,(propane tank not included) loading fee $500 
2116 Located in Canon City, CO --  CPM 7000  broken quill with bearings, wear ring, and locking key/block, (not originally 2pc)loading fee $50
2117 Located in Canon City, CO --  Large conditioner Sprout 30x144. stainless steel adjustable paddles, with 25 motor, needs belts,(new replacement cost approximately $40,000) Last runnign with PM919 pellet mill $500 loading fee 
2118 Located in Canon City, CO --  Williams Hammer Mill C32 Pulverizer Crusher, 100hp,. 22lbs swinging hammers, removable air damn, extreme dutry bearings, metal kickout chamber, 1" wear plates, Age approx 2001 (new replacement cost approximately $50,000) loading fee $500
2119 Located in Canon City, CO --  LOT: Pallet of new/unused motor, many in factory crate, (8) motors (3) 7.5hp (2)1.5hp (2)5hp (1)1hp, loading fee $100
2120 Located in Canon City, CO --  LOT:9  motors (3)NEW 1.5hp Echotop (1) NEW 1hp Techotop (2)3hp Baldor (1)3hp Brook Crompton (1)5hp Indusrtial Electric (1)2hp North American Electric $500 loading Fee
2121a Located in Canon City, CO --  LOT: 21 Eura drives: ac drives mostly 220V, single and 3phase 
2121B Located in Canon City, CO --  LOT: (4) 380. Chaoyi (4) QX1-13 380v switch
  Located in Canon City, CO --  GS ac drives model#GS2-23P0 230V 3hp.
2122 Located in Canon City, CO --  LOT: 8 NEW and USED motors (1)North American 1.5hp (1) Bad (1)? (1)WNM1.5hp (1)WNM 3hp (2)WNM 2hp (1)Brooks Champion 10hp , $100 loading fee
2123 Located in Canon City, CO --  LOT: 10 NEW Baldor motors (5) 1hp (2)3hp (3)1.5hp
2124 Located in Canon City, CO --  Ajax 100hp 1185 rpm 444T 230/460V $100 loading fee
2125 Located in Canon City, CO --  Heavy duty steel swivel mounting plate stand, qty 4, new price $390 each) loading fee $50
2126 Located in Canon City, CO --  Heavy duty steel swivel mounting plate stand, qty 2, new price $390 each) loading fee $50
2127 Located in Canon City, CO --  LOT: 4 NEW MOTORS (3)Techotop 3hp (1)North American Electric 15hp
2128 Located in Canon City, CO --  CME R30 conditioner stainless steel paddle and tube qty 2 (new price $6500 each) loading fee $100
2129 Located in Canon City, CO --  NEW (3)Techotop 7.5hp 1200 230/460V 254T Loading fee 100
2130 Located in Canon City, CO --  NEW North American 20hp 3600rpm motor 256T, loading fee $100
2131 Located in Canon City, CO --  NEW (3)Techotop 7.5hp (7) motor front plates (3)15hp (2)3hp (1)25hp (1)20hp fee $100
2132 Located in Canon City, CO --  Lincoln Electric motor 150hp 460V 1180rpm, loading fee $100
2133 Located in Canon City, CO --  Lot: 3 stainless steel feeders 1 new(new cost $9000), 2 used/parts, loading fee $100
2134 Located in Canon City, CO --  SKIP 
2135 Located in Canon City, CO --  New swivel stand (new cost $390), load out $50
2136 Located in Canon City, CO --  Conditioner belt guard, load out fee $50
2137 Located in Canon City, CO --  pallet of ss feeder shell, force feder, 2 gearbox drives, and 2 motors, load out fee $50
2138 Located in Canon City, CO --  LOT: 2 NEW/Unused motors, North American Electric 10hp 1175rpm load out fee $100
2139 Located in Canon City, CO --  New CME feeder, no motor / gearbox, load out fee $50
2140 Located in Canon City, CO --  LOT: 6 main/bull gears last running in CPM century / 7000 etc pellet mills saved for use future rebuilds, (new replacement cost approximately $30,000)loading fee $100
2141 Located in Canon City, CO --  LOT: Misc CPM other parts including , scrapers, CPM rebuilt rolls, feed cone,  roll shipping bases, coupling parts loading fee $100
2142a Located in Canon City, CO --  Seraph industries pellet stove for wood or corn, load out fee $100
2142b Located in Canon City, CO --  Pallet of approx 20-30 bags Hearthwood hardwood pellets wood pellets loadout fee $50
2143 Located in Canon City, CO --  LOT: 3 eyewash stations, load out fee $50
2144 Located in Canon City, CO --  Northstar weed sprayer, laod out fee $50
2145 Located in Canon City, CO --  DeWalt Pressure Washer 8hp engine load out fee $50
2146 Located in Canon City, CO --  Lot: 3 largre rolls of stainless steel mesh, 48" wide (1)1/4 (1)3/16 (1) 1/16,, loading fee $50
2147 Located in Canon City, CO --  Lot: 6 NEW Rolls of approx 48" wide 5/8" squares rebounding ball wire for rebuilding rotex screeners, (new cost over $500 per roll) Loading fee $100
2148 Located in Canon City, CO --  Lot: Approx 26 Partially used rolls of assorted ss mesh various sizes, (5) 5/8 (2)4mm (1)2mesh (1)10mesh (3)8mesh (1)5mm (1)6mesh (2)12mesh (2)20mesh (3)30mesh (4)6mm (1)12mm (new cost approximately $400 per roll) loading fee $50
2149 Located in Canon City, CO --  Lot: Food Grade Grease approx 200 tubes, JAX Magnaplate  44-1, (new cost approximately $1200) loading fee $50
2150 Located in Canon City, CO --  skip
2151 Located in Canon City, CO --  New/unused stainless feed chute for CPM 7000, (new cost approximately $3900) laoding fee $100
2152 Located in Canon City, CO --  Sprout Andritz pellet mill Model 26W300 SN 761213 with a WEG 250hp 1200rpm motor recently last running wood alfalfa pellets, door removed for shipping purposes, includes 1/4" die and rolls, and force feeder.(new replacement cost approximately $200,000) loading fee $500.
2153 Located in Canon City, CO --  Lot 2 rolls for CPM 7000 pellet mill, loading fee $50
2154 Located in Canon City, CO --  NEW R30 feeder / conditioner, (new price 9000)loading fee $50
2155 Located in Canon City, CO --  CPM DS Series Gearbox, requires shear pin, door, feed cone etc, loading fee $100
2156 Located in Canon City, CO --  NEW WNM 30hp motor 230/460V 3550rpm 286TS loading fee $100
2157 Located in Canon City, CO --  CPM 7800 gearbox with quill, main gear, pinion gear, and covers 30inch die, missing door and mainshaft etc loading fee $100
2158 Located in Canon City, CO --  Sprout 26 pellet mill Model 26NW300  SN80591with force feeder, good gears last running wood pellet at approximately 3 tons/hr, loading fee $500
2159 Located in Canon City, CO --  Sprout Andritz pellet mill model 26 series, last running in line running wood pellets, includes feeder/conditioner, force feeder, good gears, upgraded heaby duty die housing, shear pin upgraded to brake assembly, no motors (new replacment cost approximately $250,000) loading fee $500
2160 Located in Canon City, CO --  CPM conditioner approximately 18" x 6/5',  w/motor 20hp motor,. stainless steel adjustable paddles, with die hoist(new replacment cost approximately $30,000) loading fee $100
2161 Located in Canon City, CO --  LOT: 2 Sprout 501 die housings, no cracks, (new replacment cost $9,000 each)loading fee $100
2162 Located in Canon City, CO --  skip 
2163 Located in Canon City, CO --  Sprout  26 pellet mill with feeder conditioner, and force feeder, no motor, dies shown on base not included, good gears(new replacement cost approximately $250,000) loading fee $500
2164 Located in Canon City, CO --  LOT: 3 Used 7000 Dies 22 1/2" x 1/4" holes,Last running animal feed (new replacement cost $5500 each) loading fee $100
2165 Located in Canon City, CO --  Sprout Andritz Feeder Conditioner for Sprout 26" mill, no motor, (new replacement cost approximately $30,000) Loading fee $100
2166 Located in Canon City, CO --  Sprout Andritz Feeder Conditioner for Sprout 26" mill, no motor, (new replacement cost approximately $30,000) Loading fee $100
2167 Located in Canon City, CO --  Lot: 2 US General US660V Air Compressor 3.5hp 12.35 acfm at 100psi 15amps 60 gallon(new price approximtely $750 each)Loadign fee $100
2168 Located in Canon City, CO --  CPM 7800 Main Shaft with outer shearpin housing and misc parts(new replacement cost approximately $20,000) laoding fee $100
2169 Located in Canon City, CO --  Sprout Waldron Andritz vertical cooler rated at approximately 6-8 tons/hr of cooling, last running animal feed,(new replacment cost approximately $20,000) loading fee $100
2170 Located in Canon City, CO --  Brook Crompton 300hp 449TZ, 1190 rpm 460V, Loading fee of $100
2171 Located in Canon City, CO --  Sprout vertical pellet cooler model 375 rated at approximately 6-8 tons/hr, missing drive motor, sepatared into 2 pcs for shipping purposes
2172 Located in Canon City, CO --  LOT 2 sprout stiffener rings and 2 feed cones for sprout 26 gearbox pellet mills, (total new replacment cost approxiamtely $10,000) loading fee $100
2173 Located in Canon City, CO --  LOT: Misc parts for Sprout 26 pellet mills including: scrapers, roll shafts, roll shells, loading fee $50
2174 Located in Canon City, CO --  LOT: 2 Sprout 501 Narrow roll assemblies with new shells (new replacement cost approximately $1200 each)loading fee $50
2175 Located in Canon City, CO --  LOT: Misc parts for Sprout 26 pellet mills including: scrapers, roll shafts, roll shells, loading fee $50
2176 Located in Canon City, CO --  Lot: 2 Sprout 26 Rolls with shells in excellent condition(new cost approximately $1300 each) loading fee $50
2177 Located in Canon City, CO --  Lot: 2 Sprout 501 rolls narrow, minimal wear, (new cost approximately $1200 each) loading fee $50
2178 Located in Canon City, CO --  Lot: 2 Sprout 501 dies, 1/4 hoes approximately 2" thick. last running animal feed, loading fee $50
2179 Located in Canon City, CO --  LOT 2: Timken Pillow Block Bearing Housing SAF520 loading fee $50
2180 Located in Canon City, CO --  Sprout  501 Cartridge with 14 groove pulley, Main Shaft and die housing and die (new cost approximately $20,000) Loading fee $100
2181 Located in Canon City, CO --  skip 
2182 Located in Canon City, CO --  skip 
2183 Located in Canon City, CO --  skip 
2184 Located in Canon City, CO --  skip 
2185 Located in Canon City, CO --  skip 
2186 Located in Canon City, CO --  skip 
2187 Located in Canon City, CO --  skip 
2188 Located in Canon City, CO --  skip 
2189 Located in Canon City, CO --  NEW CPM Hyflow l CPM 1012 Wide die, new never used 1/4" x 2" Exp, (new cost approximately $2900) loading fee $50
2190 Located in Canon City, CO --  Lot: 5 Sprout 501 feed cone, 4 501 siffener rings, and various lab seals, bearings, fasteners, (new replacement cost approximately $50,000) loading fee $50
2191 Located in Canon City, CO --  Lot: 7 sprout 501 narrow rolls with good or new shells, (approximate new replacment cost $8,000-12,000. loading fee $50
2192 Located in Canon City, CO --  Used CPM Century die 16" diameter 1/4 hole, (new replacement cost approximately $3500) loading fee $50
2193 Located in Canon City, CO --  Cartridge Housing for CPM 22" mill (new replacement cost approximately $50,000) loading fee $50
2194 Located in Canon City, CO --  LOT: CPM stainless pellet mill century door, 262 gear reducer wtih motor (replacment cost approximately $5000) loading fee $50
2195 Located in Canon City, CO --  CPM Door double hinged last running on 16" CPM Pellet Mill, with vents knife post, and handles (new cost approximately $5000) loading fee $50
2196 Located in Canon City, CO --  skip
2197 Located in Canon City, CO --  Lot: Express Scale JMDT2502 SN020362, with foot switch, digital readout, loading fee $100
2198 Located in Canon City, CO --  General Electric Motor 300hp, 449T 1800 460V, loading fee $100
2199 Located in Canon City, CO --  Sprout Die 26"narrow -1/4 holes approx 2" thick, loading fee $50
2200 Located in Canon City, CO --  CPM Door approximately 50" diameter with feed chute for 7800 or similar pellet mill, loading fee $100
2201 Located in Canon City, CO --  Sprout feeder 1.5hp and conditioner w/motor10hp last running with 26" pellet mill, last running animal feed,(new replacement cost approximately $30,000) loading fee $100
2202 Located in Canon City, CO --  LOT: Sprout 501 1/4" die with 3 rebuilt 501 roll assemblied, loading fee $50
2203 Located in Canon City, CO --  Lot: Lesson 3hp motor and Dayton 1/2hp reducer, loadinge fee $50
2204 Located in Canon City, CO --  Used CPM Conditioner 18" x 5', loading fee $50
2205 Located in Canon City, CO --  Western Electric motor 100hp 1800rpm 230/460V loading fee 100
2206 Located in Canon City, CO --  Hyster Forklift H80C Propane, newer tires 8000 capacity pneumatic tire, can inspect running at our facility, (no propane tank) loading fee $100
2207 Located in Canon City, CO --  CPM Feeder and Conditioner w/1hp Baldor motor, loading fee $100
2208 Located in Canon City, CO --  Buhler stainless steel conditioner, 42" x 9', Loading fee $100
2209 Located in Canon City, CO --  RARE CPM flat die pellet mill, one of CPM's first pellet mill designs before they made ring die machines, made in San Francisco CA, loading fee $100
2210 Located in Canon City, CO --  Westinghouse 200hp motor 1800rpm 460 447TS with partial coupling, loading fee $100
2211 Located in Canon City, CO --  Sprout pellet cooler model 375 or similar,(approximate new replacement cost $20,000) loading fee $100
2212 Located in Canon City, CO --  CPM small cooler with crumbler, (approximat new replacement cost approximately $30,000)loadng fee $100
2213 Located in Canon City, CO --  CPM feeder 7'x10" with motor loading fee $50
2214 Located in Canon City, CO --  CPM Feeder  5'x 12", stainless shell, mild steel screw with motor/reducer loading fee $50
2215 Located in Canon City, CO --  Westinghouse 100hp, 1800 rpm motor 445US 220/440 loading fee $100
2216 Located in Canon City, CO --  CPM Cooler 3'x3', parts machine, appears to model 2GA, loading fee $50
2217 Located in Canon City, CO --  Stainless Conditioner, approximately 18" x66" no motor, adjustable paddles loading fee $50
2218 Located in Canon City, CO --  Towmotor forklift, propane 12,000 rated but has lifted more, currently running and in use, (no propane tank)  loading fee $100
2219 Located in Canon City, CO --  5 ton Wallace Gantry model:5T19-20 12'-6 1/2" tall x 7'-9"wide with hoist, loading fee $500
2220 Located in Canon City, CO --  CPM 7000 pellet mill in process of being rebuilt(replacement cost approximately $260,000) loading fee $500
2221 Located in Canon City, CO --  Buhler 400hp pellet mill disassemble for rebuild (replacement cost approximately $275,000) loading fee $500
2222 Located in Canon City, CO --  Sprout 26 LM2 pellet mill disassembled for rebuild (replacement cost approximately $275,000) loading fee $500
2223 Located in Canon City, CO --  Colorado Mill Equipment HMX400 44x40 hammermill with 200hp motor, made in 2017, low hours, updated door locks, rated up to 400hp loading(New replacement cost $70,000)fee $500 
2224 Located in Canon City, CO --  Torin Big Red Jacks 40 ton pneumatic shop press, runs/currently in use loading fee $100
2225 Located in Canon City, CO --  Mitsubishi 4000lbs forklift model FGC20, propane, in use / running, (no propane tank) loading fee $500
2226 Located in Canon City, CO --  Clark 8k lbs forklift, propane, 8' forks, pneumatic tires, currently in use/runs, (propane tank not included) loading fee $500
2227 Located in Canon City, CO --  Hyster50 forklift propane, cushion tires, triple mast with 185.5" lift, 3350lb at 25.5" max load, weak brakes, runs,(no propane tank)  loading fee $500
2228 Located in Canon City, CO --  Binks Air Paint Cabinet, removal and loading fee $500 
2229 Located in Canon City, CO --  Yard Sport YS200 4X2, a lot of fun, but wont start right now, loading fee $100
2230 Located in Canon City, CO --  Dynamic Balancing Machine, Dynamics Research,  Noremac 605, Rated up to 5000lbs Over 60" swing and length, with 10hp motor, rebuilt and completely updated with Easy Balance Controls. New Replacement cost approximately $75,000
2231 Located in Canon City, CO --  CME 2019 10hp Stainless Steel HMS w/Base, very low hours only used in lab (new cost $16,000) loading fee $500
2232 Located in Canon City, CO --  CME Mill 10 Pellet Mill with 10hp motor, die and rolls new cost $7000, only used in lab, very low hours, loading fee $100
2233 Located in Canon City, CO --  CME R30 Pellet Mill, very low hours only used in lab,  with ss door, die, rolls, special infeed chute, new cost $25,000, removal and loading fee $500
2234 Located in Canon City, CO --  CME RB500 Ribbon Blender only ran in lab, new cost approx $7000, Loading fee $500
2235 Located in Canon City, CO --  Faro Arm CMM model:P08 revision 21.4 serialnumber: P08-02-05-03683 Loading fee $50
2236 Located in Canon City, CO --   
Bliss 150hp pellet mill with dual motor, last running alfalfa pellets in April 2020, replaced with higher production machine, with spare parts, reported in running condition, Loading Fee $500
3000 Located in Canon City, CO --  Hankook lathe Model: HPL, SN PB9N05-07, 4 Jaw 31.5" Chuck, 35.4" Swing, 157" distance between centers, Spindle RPM 14-1120, Cross Feed: .0023-.012 IPR, Apron feed .0047-.027 IPR MFG Date 5/29/89 20hp 480v, currently under power and running, (approx new replacement cost 100k) loading fee $500
3001 Located in Canon City, CO --  MSC Band Saw 7X12 1hp 110v, 3/4 x .032" x 93" blade, SN 372536,  built 2003, in use and under power, loading fee $100
3002 Located in Canon City, CO --  Takisawa Lathe Lathe Model: 1000CD Serial Number: T89090051 Date of Manufacture: 1989 Spindle RPM: 55-1800 Feed: .0015-.0826 IPR  Accessories: Tailstock, Steady Rest, Quick Change Tool Post, Anilam MiniWizard Direct Read Out Power: 240 Volts, currently in use and under power, loading fee $100
3003 Located in Canon City, CO --  Vantage End Mill Vertical Knee Mill 3HP Make: Jih Fong Machinery with a Vantage Head, the head has been replaced at some point Model: JF-153V  Serial Number: 95190 X Axis Travel: 30" Y Axis Travel: 11.5" Accessories: X Axis Power Feed, Delos Direct Read Out, 11 R8 Collets. VISE SHOWN NOT INCLUDED. load out fee $100
3004 Located in Canon City, CO --  Clark Fork Lift propane 12,000# cap 3'-1/2" forks "NOT RUNNING, had problems with engine loadout fee $100
3005 Located in Canon City, CO --  Hyster S35XM SN D010H02294Z 3400lbs forklift solid tires, propane, currently in use, double mast with fork positioner, load out fee $100
3006 Located in Canon City, CO --  Hyster 141H forklift, electric, believed to need new battery, currently not operational, load out fee $100
3007 Located in Canon City, CO --  Hobart Charger Model#1R18-550, electric charger for forklift, 36v output 115amps ,load out fee $50
3008 Located in Canon City, CO --  Ramco Patriot End Mill Delta 10 CNC Ram8 220v, not currently in service, SN 8906400143 Axis CNC Mill, BT 40 Taper, 13" X 42" Table, Spindle Drive Error and Fault, Ball Screw Bearing Housing Failure. load out fee $100
3009 Located in Canon City, CO --  Hobart Charger Model#1R18-550, electric charger for forklift, 36v output 115amps ,load out fee $50
3010 Located in Canon City, CO --  TB Lathe C3123 Binns and Berry 12.5 TB MK 1, swing is 24" and swing in gap is 44", running when taken out of service and replaced with larger unit, load out fee $500
3011 Located in Canon City, CO --  LOT: Sprout 501 door with main pulley cover and seal plates, misc guards, load out fee $100
3012 Located in Canon City, CO --  Lot: Misc gaurds, cables conduit, etc, loadout fee $50
3013 Located in Canon City, CO --  CPM pellet mill 1116-4 SN 399427 Year 1999, w/Toshiba-Houston 100hp 230/460v motor with double knife door, stainless gravity dump chute, stand, complete with die, rolls, front, feed cone, and die clamps (New replacement cost approximately $120,000) load out fee $500
3013B Located in Canon City, CO --  LOT: 14 assorted 501 narrow dies with various holes sizes and effectives,for use with stiffener ring load out fee $100
3014 Located in Canon City, CO --  Sprout 501HL base, 14 groove main pulley(has chip on outside) and mainshaft, Sprout main pulley shroud load out fee $100
3015 Located in Canon City, CO --  Lot: Misc gaurds, cables conduit, etc, loadout fee $50
3017 Located in Canon City, CO --  CPM century/roughager gearbox SN 237004 empty gearbox load out fee $100
3018 Located in Canon City, CO --  CPM 125C empty gearbox, loading fee $100
3019 Located in Canon City, CO --  LOT: CPM Main Shafts and 1 rolls assembly, load out fee $100
3020 Located in Canon City, CO --  SKIP
3021 Located in Canon City, CO --  CPM die clamps Load out fee $50
3022 Located in Canon City, CO --  Sprout feeder conditioner shaft load out fee $50
3023 Located in Canon City, CO --  Sprout stainless feeder / conditioner(new replacement cost approximately $20,000) load out fee $100
3024 Located in Canon City, CO --  Abar Ipsen HR26x36 vacuum heat treating oven with ancillary pumps and controls recently running at a parker hannifin location in 2019, 24" wide x 18" high x 36" deep work zone, 16" varian pump, stokes 212 roughing pump, 412 booster pump, updated controls, fully supported by mfg(new replacement approx $500,000-600,000) Load out fee $500
3025 Located in Canon City, CO --  skip
3026 Located in Canon City, CO --  Towmotor Cat Forklift Model#750SG15024 propane, 15k forklift, can be inspected under power at facility, currently in use, 8' forks, loading fee $500
3027 Located in Canon City, CO --  Grieve Ovens Industrial Oven Model#AB-850 460v 32.5amps 24KW, Max chamber temp 850F 24" x 24" x 24" inside chamber, modern unit still built built today by Greive, (new replacement cost approximately $20,000)  load out fee $100
3028 Located in Canon City, CO --  Baldor 2hp motor with Reeves drive load out fee $50
3029 Located in Canon City, CO --  Daewoo GC25s Forklift propane, outdoor solid tires triple mast 188 total lift, 4000lbs, currently runs, to see under power you can see at facility, controls for up/down, tilt, shift,  load out fee $100
3030 Located in Canon City, CO --  LOT: Spare dies and Rolls for Mill30 30hp flat die pellet mill, also pulleys, roll adjuster, guards etc, load out fee $50
3031 Located in Canon City, CO --  Lot: 2 Sprout 21N250 pellet mill die housings and 1 stiffener ring ( new replacement cost approximately $30,000) load out fee $100
3032 Located in Canon City, CO --  Lot:Misc. Sprout spare parts including 4 501 roll assemblies, front plate, feed cone, gearbox, shear pins, etc. Load out fee $50
3033 Located in Canon City, CO --  Lot: 2 501 sprout dies with stiffener rings and 2 Roll assmblies, top pallet only load out fee $100
3034 Located in Canon City, CO --  Lot: 2 Sprout Andritz 501 mainshafts(new replacment cost approximately $10,000 each) and 3 feed cones for sporut 501 Loading fee $100
3035 Located in Canon City, CO --  Lot: Misc Hammermill screens, load out fee $50
3036 Located in Canon City, CO --  Lot: sprout Jr 500 die 11/64 x 1.5" effective approx, 1 1/2 overall thickness, 2 gravity feed chutes, and ss seal ring, load out fee $50
3037 Located in Canon City, CO --  Lot: Misc. Parts, electrical etc loading fee $50
3038 Located in Canon City, CO --  New/Unused C3 screener with discharge gate and spring loaded from support bracket, primed only, no vibratory motor, no stand, rated at up to 1-5 tons/hr(new replacement cost $5000) load out fee $50
3039 Located in Canon City, CO --  New/Unused C3 screener with discharge gate and spring loaded from support bracket, primed only, no vibratory motor, no stand, rated at up to 1-5 tons/hr(new replacement cost $5000) load out fee $50
3040A Located in Canon City, CO --  New C10 blower housing, no motor, no shaft, load out fee $50
3040B Located in Canon City, CO --  New CME HMA30 hammermill with 30hp and blower (NEW COST $12,500) load out fee $100
3041 Located in Canon City, CO --  Anver lifting system systems vacuum suction cup lifting unit, loading fee $100
3042 Located in Canon City, CO --  skip
3043 Located in Canon City, CO --  New/Unused C3 screener with discharge gate and spring loaded from support bracket, primed only, no vibratory motor, no stand, rated at up to 1-5 tons/hr(new replacement cost $5000) load out fee $50
3044 Located in Canon City, CO --  New/Unused C3 screener with discharge gate and spring loaded from support bracket, primed only, no vibratory motor, no stand, rated at up to 1-5 tons/hr(new replacement cost $5000) load out fee $50
3045 Located in Canon City, CO --  New/Unused C3 screener with discharge gate and spring loaded from support bracket, primed only, no vibratory motor, no stand, rated at up to 1-5 tons/hr(new replacement cost $5000) load out fee $50
3046 Located in Canon City, CO --  skip
3047 Located in Canon City, CO --  skip
3048 Located in Canon City, CO --  30KVA Transformer 3phase  480V, load out fee $50
3049 Located in Canon City, CO --  Lot: Misc CPM parts including die clamps, century feed cone, outer shear pin, die clamp, top cover loading fee $50
3050 Located in Canon City, CO --  Miller Gas Powered Welder Roughneck 2E, load out fee $50
3051 Located in Canon City, CO --  NEW unused CME 5" x 8 auger, missing motor pulley load out fee $50
3053 Located in Canon City, CO --  skip
3052a Located in Canon City, CO --  skip
3052 Located in Canon City, CO --  Lot: Misc 1-2hp Cylcoidal Gear Reducers, load out fee (replacement cost approximately $300 each) $50
3054 Located in Canon City, CO --  skip 
3055 Located in Canon City, CO --  skip
3056 Located in Canon City, CO --  skip
3057 Located in Canon City, CO --  skip
3058 Located in Canon City, CO --  skip
3059 Located in Canon City, CO --  skip
3060 Located in Canon City, CO --  skip
3061 Located in Canon City, CO --  skip
3062 Located in Canon City, CO --  skip
3063 Located in Canon City, CO --  skip
3064 Located in Canon City, CO --  skip
3065 Located in Canon City, CO --  skip
3066 Located in Canon City, CO --  skip
3067 Located in Canon City, CO --  skip
3068 Located in Canon City, CO --  skip
3069 Located in Canon City, CO --  skip
3070 Located in Canon City, CO --  skip
3071 Located in Canon City, CO --  Sprout 26NW300 pellet mill with250hp motor(but motor is not mounted on machine, includes door, force feeder, last runing wood pellets at 3 tons/hr, rated at 3-5 tons/hr on alfalfa, and up to 12 tons/hr on general feeds, (replacement cost approximately $200,000) load out fee $500
3072 Located in Canon City, CO --  CPM  Master 30hp pellet mill with feeder and conditioner, rate at approximately 1 ton/hr on general feeds replacment cost new approximately $75,000  loading fee $100
3073 Located in Canon City, CO --  skip
3074 Located in Canon City, CO --  LOT: Misc CPM parts including century shear pin housings, feed cones, plates, pellet mill die, valves etc loadout fee $50
3075 Located in Canon City, CO --  skip
3076 Located in Canon City, CO --  LOT: New MISC New and Used motor/gearboxes/airlock: (4)Motors (2)WNM 3phase 1hp 1140rpm 208/230/460 (1)WNM 3phase 2hp 1170rpm 208/230/460v (1) WNM 3phase 2hp 1170rpm 208/230/460v (1) CF3- Cyclone Airlock C3391007 (17) drive to drive's laoding fee $50
3077 Located in Canon City, CO --  Lot: 5 airlock with sightglass,, 1 standard airlock(new replacement cost approximately $3000 each) loading fee $50
3078 Located in Canon City, CO --  Lot: Sprout force 501 force feeder(new replacment cost $6900), motor, 50 shear pin collar (new replacement cost $900), sprout knife holder etc loadng fee $50
3079 Located in Canon City, CO --  Lot: Misc spare parts: pulley, feed chutes loading fee $50
3080 Located in Canon City, CO --  Lot: Misc spare parts loading fee $50
3081 Located in Canon City, CO --  Lot: sprout 501 shroud, seal plate, shear pin collar, loading fee $50
3082 Located in Canon City, CO --  New/unused CME Large C10 airlock, no drive (replacment cost $3200) loading fee $50
3083 Located in Canon City, CO --  Lot: New/unused pellet mill force feeders loading fee $50
3084 Located in Canon City, CO --  LOT: Greasers/Lubricator parts loading fee $50
3085 Located in Canon City, CO --  Sprout 501 mainshaft (new replacement cost $9500) loading fee $50
3086 Located in Canon City, CO --  Lot: sprout 501 mainshaft (new replacement cost $9500) and feedcone loading fee $50
3087 Located in Canon City, CO --  Sprout mainshaft for 3 roll pellet mill for sprout 26 pellet mill(new replacement cost approx $15,000) loading fee $50
3088 Located in Canon City, CO --  Lot: 2 cpm pinion gears loading fee $50
3089 Located in Canon City, CO --  Lot: 4 CPM century Mainshafts, loading fee $50
3090 Located in Canon City, CO --  Lot: 4 CPM pellet mill quills loading fee $50
3091 Located in Canon City, CO --  Lot: 3 CPM Century pellet mill quills loading fee $50
3092 Located in Canon City, CO --  Century quill loading fee $50
3093 Located in Canon City, CO --  Lot: 4 Century Quills loading fee $50
3094 Located in Canon City, CO --  Lot 4 Century quills loading fee $50
3095 Located in Canon City, CO --  Lot 4 cpm pellet mill quills loading fee $50
3096 Located in Canon City, CO --  Box of bearings and misc parts for CPM 3000 and 7000(1)New 7000 Main Shaft Bearing (1)New 3020 MainShaft Timken Bearing (1)New 24030 cc/w33 SKF Bearing (2) loading fee $50
3097 Located in Canon City, CO --  Lot: rectangular to round (2)16"x9 1/2"x12"round   (1)18 1/2"x12"x14"round  (1)23 1/2"x14 1/2"x16"round loading fee $50
3098 Located in Canon City, CO --  Lot:1 Pallet of 2 Sprout dies with stiffener rings loading fee $50
3098A Located in Canon City, CO --  LOT:1 crate of hinges, knife post assemblies spanner nuts,  loading fee $50 (wear rings in pic not included)
3098B Located in Canon City, CO --  LOT: 2 sprout wear rings loading fee $50 (wear rings only no other parts included)
3099 Located in Canon City, CO --  New CME C10 Cyclone with top mounted blower and motor Baldor 15hp, 3480 rpm, 230/460v W/Fan Rated at approximately 5000 cfm at 12" static pressure for use with hammermills, pellet coolers, almond powder coating, etc, (new cost $8900) ships on 3 pallets, loading fee $100
3100 Located in Canon City, CO --  Leblond Lathe  Swing 15", Distance between centers 54", D1-6" Chuck Included, Servo Shift, 30-1800 RPM, No Tool Holder, loading fee $100
3101 Located in Canon City, CO --  CPM Conditioner w/motor 25hp 8.5' long conditioner, last running with CPM 9036 large pellet mill(new replacement cost approximately $30,000) loading fee $100
3102 Located in Canon City, CO --  LOT: CPM Chute, door backplate etc loading fee $50
3103 Located in Canon City, CO --  LOT: Sprout 501H Base with feed cone and belting loading fee $100
3104 Located in Canon City, CO --  Lot 3 new CME Cyclones rated at approximately at up to 1500cfm commonly used used HMA30 hammermills (new cost $1200 each) loading fee $100
3105 Located in Canon City, CO --  skip
3106 Located in Canon City, CO --  Discontinued 40"x120" double deck screener, with isolation stand(missing 2 cables) no motor                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                 loading fee $100
3107 Located in Canon City, CO --  Discontinued 40"x84" double deck screener, no motor, with isolation stand with cables, loading fee $100
3108 Located in Canon City, CO --  Discontinued 40"x84" double deck screener, no motor, with isolation stand,(missing cover) loading fee $100
3109 Located in Canon City, CO --  Discontinued 40"x84" double deck screener, no motor, with isolation stand with cables, loading fee $100
3110 Located in Canon City, CO --  Discontinued 40"x84" double deck screener, no motor, with isolation stand and calbes, loading fee $100
3111 Located in Canon City, CO --  Discontinued 40"x84" double deck screener, no motor, with isolation stand, loading fee $100
3112 Located in Canon City, CO --  Discontinued 40"x84" double deck screener, no motor, with isolation stand, loading fee $100
3113 Located in Canon City, CO --  Discontinued 40"x84" double deck screener, no motor, with isolation stand, loading fee $100
3114 Located in Canon City, CO --  CPM Gearbox #202-320818 with misc parts loading fee $100
3115 Located in Canon City, CO --  CPM S/N: #202-295717, last running with a 250hp motor and using a 22" die. loading fee $100
3116 Located in Canon City, CO --  Sprout Andritz die approx 36" diameter with 1/8 holes probably for PM919XW 3" overall thickness loading fee $50
3117 Located in Canon City, CO --  skip
3118 Located in Canon City, CO --  CPM die 30" diameter and 3/16 holes for CPM 7800 3" overall thickness loading fee $50
3119 Located in Canon City, CO --  skip
3120A Located in Canon City, CO --  skip
3120B Located in Canon City, CO --  CPM 3020 die (Bottom Die Only) approx 1/4 holes x 2-3/4 effective loading fee $50
3121A Located in Canon City, CO --  Sprout Die 26"(top die only) wide die approx 3/16 x 2-1/4, 2 1/2" overall  thickness loading fee $50
3121B Located in Canon City, CO --  Sprout Die 26 (bottom die only) die approx 1/4" x 1-3/4" eff loading fee $50
3122 Located in Canon City, CO --  LOT: 2 CPM Dies 7000 22.5" approx 1/4" X 3 EFF  loading fee $50
3123 Located in Canon City, CO --  LOT: 2 Sprout 1/4" Die approx 1/4" X 1 1/4 EFF & 1/4" X 2 3/4 EFF loading fee $50
3124 Located in Canon City, CO --  CPM Hyflow die approx 3/16 x 2" effective loading fee $50
3125 Located in Canon City, CO --  CPM Century 1/4 die approx 1-3/8 effective loading fee $50
3126 Located in Canon City, CO --  Sprout Ace Die approx with oval extrusion approx 11/16"x5/16" x 5" overall thickness loading fee $50
3127 Located in Canon City, CO --  CPM 7000 Die approx 1/4" X 1 1/4 EFF  loading fee $50
3128 Located in Canon City, CO --  CPM 3020 Die 3/4" x 5" loading fee $50
3129 Located in Canon City, CO --  CPM 7000 1/4 die x approx 3 eff loading fee $50
3130 Located in Canon City, CO --  CPM 3020 die approx 3/16" x 2 1/4" overall thickness  loading fee $50
3131 Located in Canon City, CO --  LOT 2: Sprout  26" die 1/4" Dies loading fee $50
3132 Located in Canon City, CO --  Sprout 32" Die: approx 1/4" X 2 1/2 EFF  loading fee $50
3133 Located in Canon City, CO --  LOT: 4 Sprout 32" dies with 1/4 hole: 1/4" Die with approx 2" to 2.5" effective loading fee $50
3134 Located in Canon City, CO --  Inside Dia: 20"" Extruder size: 3/16" Die Type: Clamp on CPM, 3/16" X 1 3/4 EFF  loading fee $50
3135 Located in Canon City, CO --  Lot: 2 Sprout 26” die for approx 1/4” and 3/16 pellets, loading fee $50
3136 Located in Canon City, CO --  CPM 3020 Die approx 1/4" X 1 3/4" EFF  loading fee $50
3137 Located in Canon City, CO --  Lot: Misc parts, gears, and plastic conveyor links Loading fee $50
3138 Located in Canon City, CO --  3M Box Sealer 52"  x 30" x 57" high  loading fee $50
3139 Located in Canon City, CO --  skip
3140 Located in Canon City, CO --  skip
3141 Located in Canon City, CO --  skip
3142 Located in Canon City, CO --  skip
3143 Located in Canon City, CO --  LOT 2 CPM 7000 die 1/4 Loading fee
3144 Located in Canon City, CO --  LOT 3 CPM century dies: approx Cube DIe (1)1/2" Square Cube (1) 3/16" X 2 1/4 EFF  (1)3/16" X 2 1/4 EFF loading fee $50
3145 Located in Canon City, CO --  Lot: 2 CPM 16" dies for Roughager, early century, 8 keys on die, uses clamp on feed cone, 2 1/4" overall thickness, size approximately 11/64ths with 2" effectuve  loading fee $50
3146 Located in Canon City, CO --  Lot: 2 CPM 3020 wide 7/8 Cube dies, 5" overall thickness, 7/8" X 3 1/2 EFF  loading fee $50
3147 Located in Canon City, CO --  Lot: Misc Control panels loading fee $50
3148 Located in Canon City, CO --  Inside Dia: 36" Extruder size: 3/16"" Die Type: Bolt on Sprout, 3" overall thickness loading fee $50
3149 Located in Canon City, CO --  Inside Dia: 36" Extruder size: 3/16"" Die Type: Bolt on Sprout, 3" overall thickness loading fee $50
3150 Located in Canon City, CO --  Inside Dia: 36" Extruder size: 3/16"" Die Type: Bolt on Sprout, 3" overall thickness loading fee $50
3151 Located in Canon City, CO --  Inside Dia: 36" Extruder size: 3/16"" Die Type: Bolt on Sprout, 3" overall thickness loading fee $50
  Located in Canon City, CO --  skip
3152 Located in Canon City, CO --  LOT 2 CPM 7000 Dies 3/16" by appox  1 1/2" EFF, loading fee $100
3153 Located in Canon City, CO --  Lot: 5 Sprout front plates for sprout 26 with 2 front deflectors, and 3 sprout front deflector for sprout 21 loading fee $50
3154 Located in Canon City, CO --  Canco American Can 06 can seamer,423-IES-00 closing machine SN 4165  last running at a facility that processed nuts loading fee $100
3155 Located in Canon City, CO --  Vermeer  HBP520 Block Brick Machine, Very low hours, Kohler 20hp engine, portable , for making compressed soil bricks loading fee $100
3156 Located in Canon City, CO --  CPM quill loading fee $50
3157 Located in Canon City, CO --  CPM quill loading fee $50
3158 Located in Canon City, CO --  Lot: Misc Sprout parts including feed cone, stiffener ring and roll shell loading fee $50
3159 Located in Canon City, CO --  Lot: 2 Sprout 26" dies approx 1/4" , 3" overall thickness, 2) 1/4" X 2 3/4 EFF, loading fee $50
3160 Located in Canon City, CO --  Sprout 26" Cube approx 1/2 holes loading fee $50
3161 Located in Canon City, CO --  7000 Parts frontbearing housings (out of spec) loading fee $50
3162 Located in Canon City, CO --  Lot: spare parts including sprout 501, door seal rings, front plates with ribbon deflector loading fee $50
3163 Located in Canon City, CO --  Lot: 2 501 mainshafts, 2 501 shear pin collar  and mainshaft nut loading fee $50
3164 Located in Canon City, CO --  Lot: CPM Mainshaft and quill loading fee $50
3165 Located in Canon City, CO --  Lot : Misc spare parts 7000 shear pin inner and outer, hinges loading fee $50
3166 Located in Canon City, CO --  Lot: 501 Roll Shells and die clamps loading fee $50
3167 Located in Canon City, CO --  Lot: CPM gearbox cartridges loading fee $50
3168 Located in Canon City, CO --  Sprout stainless feeder conditioner screw and paddle shaft spin independently loading fee $50
3169 Located in Canon City, CO --  Sprout stainless feeder conditioner, no drive motor (approx new replacement cost $20,000) loading fee $50
3170 Located in Canon City, CO --  Lot: CPM dual speed quills, mainshafts, main gear and misc parts loading fee $50
3171 Located in Canon City, CO --  Lot: CPM dual speed parts gears loading fee $50
3172 Located in Canon City, CO --  Lot: Misc rollers and captive bearings loadingfee $50
3173 Located in Canon City, CO --  CPM DS casting gearbox loading fee $50
3174 Located in Canon City, CO --  Jacobson Type Tear drop shaped screens (30"x24") (three size diameters: 1/8", 5/8", 1/2") loading fee $50
3175 Located in Canon City, CO --  CPM Quill with bearings loading fee $50
3176 Located in Canon City, CO --  CPM Quill with bearings loading fee $50
3177 Located in Canon City, CO --  Forklift engine loading fee $50
3178 Located in Canon City, CO --  Lot: misc pellet mill parts loading fee $50
3179 Located in Canon City, CO --  Rockwell Hardness tester, Model 3 SS 0 #73 loading fee $50
3180 Located in Canon City, CO --  Lot: Misc electric hoists loading fee $50
3181 Located in Canon City, CO --  Rotor reported for 4420 hammermill 32-1/2" x 18-3/8" Rotor w/ 5 spaces loading fee $50
3182 Located in Canon City, CO --  Rotor reported for 4424 hammermill 32-1/2" x 23-1/2" Rotor w/ 7 spaces  loading fee $50
3183 Located in Canon City, CO --  Lot: Misc bearings and parts loading fee $50
3184 Located in Canon City, CO --  skip
3185 Located in Canon City, CO --  skip
3186 Located in Canon City, CO --  skip
3187 Located in Canon City, CO --  Chute w/ magnet IN:22 5/8" x 16 1/2" OUT: 23 1/8" x13" TALL: 14 1/2" loading fee $50
3188 Located in Canon City, CO --  skip
3189 Located in Canon City, CO --  LOT: Misc CPM feed cones loading fee $50
3190 Located in Canon City, CO --  skip
3191 Located in Canon City, CO --  Lot: 13 Gears from CPM pellet mills loading fee $50
3192 Located in Canon City, CO --  Misc electric box 24" x 24" x 13" deep loading fee $50
3193 Located in Canon City, CO --  Lot: Various hinges from CPM pellet mills and 1 magnet loading fee $50
3194 Located in Canon City, CO --  CPM Feed Cones and clamps loading fee $50
3195 Located in Canon City, CO --  Feed cones loading fee $50
3196 Located in Canon City, CO --  skip
3197 Located in Canon City, CO --  Lot: Misc steel parts- loading fee $50
3198 Located in Canon City, CO --  CPM Dual Speed Housings- loading fee $50
3199 Located in Canon City, CO --  skip
3200 Located in Canon City, CO --  Dual speed cartridge housing (no feed cones) loading fee $50
3201 Located in Canon City, CO --  CPM Century Gear Box, Loading fee $50
3202 Located in Canon City, CO --  Lot: Various stiffener rings, wear ring, front plate etc loading fee $50
3203 Located in Canon City, CO --  CPM Century Gear Box with main gear and quill, loading $50
3204 Located in Canon City, CO --  CPM 100DS1S Gearbox with loading fee $50
3205 Located in Canon City, CO --  CPM Century Gear Box loading fee $50
3206 Located in Canon City, CO --  CPM Century Gear Box, Loading fee $50
3207 Located in Canon City, CO --  Weighing Machine last running nuts on a can seaming line, loading fee $50
3208 Located in Canon City, CO --  Double vacuum box small can, loading fee $50
3209 Located in Canon City, CO --  Twin vacuum box, loading fee $50
3210 Located in Canon City, CO --  Conveyer last running in canning line, loading fee $50
3211 Located in Canon City, CO --  conveyor last running in canning line, loading fee $50
3212 Located in Canon City, CO --  Jeffery Rader TerraSource Model 34 SN 12405 Terra Source Wood Hog last running wood , no motor loading fee $100
3213 Located in Canon City, CO --  CPM Door and feed chute for CPM 9000, loading fee $50
3214 Located in Canon City, CO --  Toshiba Electric Motor 600hp 1800rpm, 440V 5810US loading fee $100
3215 Located in Canon City, CO --  Lot: 3 pellet mill mainshafts, front plate, rear hub etc, loading fee $50
3216 Located in Canon City, CO --  New/unused brick making machine wth Honda engine, makes adobe cement contruction bricks, (new replacement cost $50,000) loading fee $50
3217 Located in Canon City, CO --  Lot, 25hp rated blower housing, fan wheel, ductwork, loading $50
3218 Located in Canon City, CO --  Lot, 25hp rated blower housing, fan wheel, ductwork, loading $50
3219 Located in Canon City, CO --  Blower and Duct Work, loading fee $50
3220 Located in Canon City, CO --  Sprout 26" Die 1/4", loading fee $50
3221 Located in Canon City, CO --  CPM 30" Die 1/4" Die 2 1/2" overall thickness, loading fee $50
3222 Located in Canon City, CO --  Transformer, loading fee $50
3223 Located in Canon City, CO --  Atlas Copco air compressor GA509 air compressor, loading fee $100
3224 Located in Canon City, CO --  Lot: Misc steel parts from large CPM pellet Mill, loading fee $50
3225 Located in Canon City, CO --  CPM 7000 Conditioner and Feeder with magnet and motor Teco-Westinghouse 10hp 885rpm 230/460v, loading fee $50
3226 Located in Canon City, CO --  CPM large conditioner with motor no name plate, loading fee $50
3227 Located in Canon City, CO --  Unused CME R100 Pellet Mill 100hp motor with dual 50hp motor and conditioner, force feeder, 1 set of rolls, and autolube system. loading fee $50
3227A Located in Canon City, CO --  LOT:  3 NEW R100 pellet mill ring dies bottom pallet loading fee $50 in lower warehouse, loading fee $50
3227B Located in Canon City, CO --  R100 mainshaft for 100hp hp pellet mill, replacement cost $6900 loading fee $50 in lower warehouse, loading fee $50
3227C Located in Canon City, CO --  Lot: Misc CME R100 rolls, roll shells, clamps, feed cone, gearbox, shafts, and misc pellet mill parts in lower warehouse, loading fee $100
3228 Located in Canon City, CO --  Lot: Misc Duct Work Blower Housing with fan blade, loading fee $50
3229 Located in Canon City, CO --  skip
3230 Located in Canon City, CO --  skip
3231 Located in Canon City, CO --  skip
3232 Located in Canon City, CO --  Leeson 40hp 1780rpm 230/460v, Teco/Westinghouse 50hp 1800rpm 230/460v, loading fee $50
3233 Located in Canon City, CO --  LOT 8 Motors (1)World Wide 7.5hp 3520rpm  230/460v 213tc frame (1)Reliance Electric Sabre 5hp 1740rpm 208-230/460v 184tc frame (1)Baldor 3hp 1725rpm 208-230/460v 182tc frame (1)Baldor 1/3hp 1750rpm 90dc volts327-pslh-0 frame (1)Marathon DAMAGED TAG (1) Brook Hansen .33hp 1680rpm230/460v D71F frame (1)Baldor .5hp 1725rpm 208-230/460v 56C frame(1)Reliance Electric 1/2hp 1725rpm 115/230v FB56C frame loading fee $50
3234 Located in Canon City, CO --  Reliance 20hp 3525rpm 460v, loading fee $50
3235 Located in Canon City, CO --  Misc. Duct Work and transitions, loading fee $50
3236 Located in Canon City, CO --  Bliss hammermill feed chute with 40" wide magnet, loading fee $50
3237 Located in Canon City, CO --  skip
3238 Located in Canon City, CO --  Motor No name plate shaft dia. 1 5/8", loading fee $50
3239 Located in Canon City, CO --  skip
3240 Located in Canon City, CO --  skip
3241 Located in Canon City, CO --  Lot: CPM feed chutes, century rear scrapers, front scraper, front plate, rear plate, bearings, seal rings, loading fee $50
3242 Located in Canon City, CO --  Surface grinder with boyar dustcollector model 612 serialno.3197H motor: 1/3hp 220/60/3-1.5amp , loading fee $500
3243 Located in Canon City, CO --  LOT: misc. parts including coupling elements, fastener, spanner nuts, springs etc, loading fee $50
3244 Located in Canon City, CO --  Lot: gear reducers, pulleys, xp vibration sensors, and misc parts, loading fee $50
3245 Located in Canon City, CO --  LOT: Misc cpm pellet mill parts, loading fee $50
3246 Located in Canon City, CO --  Lot: CPM shear pin parts, coupling, bearings, and misc parts, loading fee $50
3247 Located in Canon City, CO --  CPM Door for century pellet mill, loading fee $50
3248 Located in Canon City, CO --  CPM pump system, loading fee $50
3249 Located in Canon City, CO --  Lot: Misc couplings, spanner nuts lock washers etc, loading fee $50
3250 Located in Canon City, CO --  skip
3251 Located in Canon City, CO --  Lot CPM century and master main shafts, loading fee $50
3251A Located in Canon City, CO --  LOT: CPM pinion gears, loading fee $50
3252 Located in Canon City, CO --  CPM 7000 1/4" die loading fee $50
3253 Located in Canon City, CO --  Lot: 3 - 1hp 1200 rpm c face motors, 1 - approx 15hp 3600rpm Electric Motors, loading fee $50
3254 Located in Canon City, CO --  LOT: CPM Bull Gear, CPM 16" backplate, and coupling, loading fee $50
3255 Located in Canon City, CO --  (2) Reliance Electric 30hp 3535rpm 230/460v, loading fee $50
3256 Located in Canon City, CO --  Lot: Misc pellet mill parts, motor slide plate, loading fee $50
3257 Located in Canon City, CO --  Lot: CPM front roll support plates etc, loading fee $50
3258 Located in Canon City, CO --  Lot: Misc motors, gearboxes, sensors etc , loading fee $50
3259 Located in Canon City, CO --  CPM Quill, loading fee $50
3260 Located in Canon City, CO --  LOT: Pellet mill pinion gears, loading fee $50
3261 Located in Canon City, CO --  LOT: pallet and box of tubes, hoses, simplex cylinders etc loading fee $50
3262 Located in Canon City, CO --  Lot: CPM Cartridge, Frontplate, pinion gear and misc parts, loading fee $50
3263 Located in Canon City, CO --  Pellet Mill Bull Gear, loading fee $50
3264 Located in Canon City, CO --  Misc. Sprout 501 main shaft and roll shells, and misc pellet mill parts loading fee $50
3265 Located in Canon City, CO --  Lot: pinion and bull gear appear to be for sprout 26 N pellet mill, loading fee $50
3266 Located in Canon City, CO --  skip
3267 Located in Canon City, CO --  LOT: Motors (1)GE 1  1/2hp 1160rpm 230/460v (1) SB 7.5kw 1450 rpm 380v (1) 30hp 1780rpm 230/460v, loading fee $50
3268 Located in Canon City, CO --  Lot: CPM mainshafts, frontplates, backplates, shearpin housings, and misc parts ,  gear, wearing etc loading fee $50
3269 Located in Canon City, CO --  Lot: 9 CPM stainless door backplates, loading fee $50
3270 Located in Canon City, CO --  skip
3271 Located in Canon City, CO --  LOT: CPM Master Dies, Approx 1/4" X 1 1/2 EFF, 2)1/8" X 1.0 EFF, 1/8" X  1 1/2 EFF, loading fee $50
3272a Located in Canon City, CO --  LOT:  3 CPM 7000 Feed Cone, Knife Assembly, die clamps etc loading fee $50
3272b Located in Canon City, CO --  New CME C10 hopper no legs, loading fee $50
3273a Located in Canon City, CO --  Lot: Misc. Pellet Mill Parts, loading fee $50
3273b Located in Canon City, CO --  LOT: wipers and deflectors etc, loading fee $50
3274 Located in Canon City, CO --  skip
3275 Located in Canon City, CO --  Lot CPM pellet mill parts, loading fee $50
3276 Located in Canon City, CO --  Lot: Die clamp and wear rings, loading fee $50
3277 Located in Canon City, CO --  Lot: 6 sprout dies(5/8, 1/4, 1/8, 5/16) and 1 cpm die, loading fee $50, 
3278 Located in Canon City, CO --  Lot: Misc CPM parts, loading fee $50
3279 Located in Canon City, CO --  Lot: misc pellet mill knive parts, loading fee $50
3280 Located in Canon City, CO --  Sprout Andritz Feeder Conditioner for 26" pellet mill , loading fee $100
3281 Located in Canon City, CO --  Lot: clamps for cpm pellet mill , loading fee $50
3282 Located in Canon City, CO --  CPM 7000 Quill , loading fee $50
3283 Located in Canon City, CO --  CPM 7000 Quill, loading fee $50
3284 Located in Canon City, CO --  NEW CME C5 Cooler discharge hopper, loading fee $50
3285 Located in Canon City, CO --  CME C5 screener no stand no motor, loading fee $50
3286 Located in Canon City, CO --  Jacobson 2436 hammermill with 200hp 3600 rpm motor ,  heavy duty design, and magnet, last running in a wood pellet plant, loading fee $100
3287 Located in Canon City, CO --  Misc. Screens, loading fee $50
3288 Located in Canon City, CO --  Drum with stand, loading fee $50
3289 Located in Canon City, CO --  Taylor OM2A bagging scale last running wood pellets, loading fee $50
3290 Located in Canon City, CO --  Screw feeder with motor and stand 7'-7" x 12", loading fee $50
3291 Located in Canon City, CO --  Hopper for williams hog, loading fee $50
3292 Located in Canon City, CO --  50hp hammermill no motor, with spare screens, loading fee $50
3293 Located in Canon City, CO --  Airlock inlet 13 5/8" x 13 1/4", loading fee $50
3294 Located in Canon City, CO --  CPM feedershell and conditioner shell (no screw or paddles) last running on CPM 250hp pellet mill, loading fee $50
3295 Located in Canon City, CO --  steel conveyor, no belting loading fee $50
3296 Located in Canon City, CO --   skip
3297 Located in Canon City, CO --  Drive-All gearbox with sprout 10 groove 501 pulley with ss seal plates, loading fee $50
3298 Located in Canon City, CO --  Sprout 501 mainshaft, dieshousing and pulley cartridge, and door seal plates, loading fee $50
3299 Located in Canon City, CO --  Steel stand with guard, loading fee $50
3300 Located in Canon City, CO --  skip
3301 Located in Canon City, CO --  InterSystems model:900841 product distributor , loading fee $50
3302 Located in Canon City, CO --  Lot: Hammermill screens (12) 1/4" (1) 1/2", loading fee $50
3303 Located in Canon City, CO --  Hammermill magnet with chute, loading fee $50
3304 Located in Canon City, CO --  Steel pan loading fee $50
3305 Located in Canon City, CO --  steel ducting, loading fee $50
3306 Located in Canon City, CO --  steel ducting , loading fee $50
3307 Located in Canon City, CO --  Lot: MISC CPM Parts, 4 century dies, clamps, share pin housing, shear pins, bearing, shafts, scrapers, wipers, roll adjusters, shells, gears and misc parts, motor reducers etc, loading fee $50
3308 Located in Canon City, CO --  Sprout stainless feeder conditioner, loading fee $50
3309 Located in Canon City, CO --  Sprout 26 pellet mill door with force feeder , loading fee $50
3310 Located in Canon City, CO --  CPM 2GA2 cooler base, loading fee $50
3311 Located in Canon City, CO --  skip
3312 Located in Canon City, CO --  Steel riser, loading fee $50
3313 Located in Canon City, CO --  Unused cyclone  9' tall x 4' round, loading fee $50
3314 Located in Canon City, CO --  skip
3315 Located in Canon City, CO --  skip
3316 Located in Canon City, CO --  skip
3317 Located in Canon City, CO --  skip
3318 Located in Canon City, CO --  skip
3319 Located in Canon City, CO --  Lot Misc steel parts, loading fee $50
3320 Located in Canon City, CO --  LOT: 9 Unused CME bins 38 1/2" X 42" X 19" tall no legs, loading fee $50
3321 Located in Canon City, CO --  Lot steel cage with cpm parts and feed cones, loading fee $50
3322 Located in Canon City, CO --  Lot: Sprout 26 die stiffener ring and wear ring, loading fee $50
3323 Located in Canon City, CO --  conveyor with drive and bin, loading fee $50
3324 Located in Canon City, CO --  century 125hp electric motor,  1170 rpm 460V 445T loading fee $100
3325 Located in Canon City, CO --  Lot: 2 Torit dust colletctors, loading fee $50
3326 Located in Canon City, CO --  Lot: Misc Chutes, loading fee $50
3327 Located in Canon City, CO --  Lot: Misc Gearboxes and vibratory tray, loading fee $50
3328 Located in Canon City, CO --  Lot: 4 heavy duty stands (2) 50" X 44 1/2" X 37" tall    (2) 50" X 44 1/4" X 42 5/8" tall, loading fee $50
3329 Located in Canon City, CO --  Bliss rotary pocket feeder with drive , loading fee $50
3330 Located in Canon City, CO --  CPM large conditioner with motor, loading fee $50
3331 Located in Canon City, CO --  Single deck screener mounted on a stand, loading fee $50
3332 Located in Canon City, CO --  spare screens $50
3333 Located in Canon City, CO --  Heil rotary single pass drum dryer with trunions 10.5' x 32', last running alfalfa, loading fee $500
3334 Located in Canon City, CO --  Sprout pellet mill approximately 250hp, no motor loading fee $100
3335 Located in Canon City, CO --  Sprout screener approximately 5 x 10 with motor / drive, loading fee $100
3336 Located in Canon City, CO --  Heil 8 x 24 rotary drum with trunions, loading fee $500
3337 Located in Canon City, CO --  Simplicity vibratory conveyor, last running in a wood pellet plant feeding a horizontal hog, loading fee $100
3338 Located in Canon City, CO --  CPM Pellet mill base with misc parts, loading fee $50
3339 Located in Canon City, CO --  Lot: 2 CPM doors and CPM base, loading fee $50
3340 Located in Canon City, CO --  SS CPM pellet mill door with knife posts, and misc parts, loading fee $50
3341 Located in Canon City, CO --  Steel plates, and pulley, loading fee $50
3342 Located in Canon City, CO --  Steel beams and riser, loading fee $50
3343 Located in Canon City, CO --  CPM pellet mill door with stainless feed chute and knife posts, CPM base and die, loading fee $50
3344 Located in Canon City, CO --   skip
3345 Located in Canon City, CO --  riser, loading fee $50
3346 Located in Canon City, CO --  CPM Pellet mill base, loading fee $50
3347 Located in Canon City, CO --  CPM Pellet Mill base, loading fee $50
3348 Located in Canon City, CO --  CPM Pellet Mill base, loading fee $50
3349 Located in Canon City, CO --  CPM Pellet Mill door backplate, feed chute, and base; sprout 501 die housing, loading fee $50
3350 Located in Canon City, CO --  CPM pellet Mill base, loading fee $50
3351 Located in Canon City, CO --  CPM Century Door with feed chute and knife post, loading fee $50
3352 Located in Canon City, CO --  SS screw feeer housing, loading fee $50
3353 Located in Canon City, CO --  Lot: 2 CPM  Bases, loading fee $50
3354 Located in Canon City, CO --  Auger stainless shell mild steel screw no drive, loading fee $50
3355 Located in Canon City, CO --  LOT: Misc screen mesh, loading fee $50
3356 Located in Canon City, CO --  Steel riser, loading fee $50
3357 Located in Canon City, CO --  LOT: 4 risers 41" x 62", 75" X 41 1/2"  (1) 10"  (1) 8"  (1)15", loading fee $50
3358 Located in Canon City, CO --  Sprout force feeder for 26" pellet mill, loading fee $50
3359 Located in Canon City, CO --  CPM pellet Mill Base, loading fee $50
3360 Located in Canon City, CO --  CPM Century door, loading fee $50
3361 Located in Canon City, CO --  CPM 3020 new pellet mill door, never used/installed loading fee $50
3362 Located in Canon City, CO --  CPM SS door loading fee $50
3363 Located in Canon City, CO --  Stainless door with force feeder, loading fee $50
3364 Located in Canon City, CO --  CPM SS door with feed chute, loading fee $50
3365 Located in Canon City, CO --  Lot: 2 set of roller conveyor, loading fee $50
3366 Located in Canon City, CO --  CPM pellet mill base, loading fee $50
3367 Located in Canon City, CO --  Steel base with infeed drum, loading fee $50
3368 Located in Canon City, CO --  CPM stainless door with feed chute, loading fee $50
3369 Located in Canon City, CO --  CPM century door, loading fee $50
3370 Located in Canon City, CO --  CPM door, loading fee $50
3371 Located in Canon City, CO --  CPM door, loading fee $50
3372 Located in Canon City, CO --  CPM SS door, loading fee $50
3373 Located in Canon City, CO --   skip
3374 Located in Canon City, CO --  CPM Screw conveyor with magnet, loading fee $50
3375 Located in Canon City, CO --  CPM door, loading fee $50
3376 Located in Canon City, CO --  CPM stainless 201/7000 door, loading fee $50
3377 Located in Canon City, CO --  CPM door with feed chute, loading fee $50
3378 Located in Canon City, CO --  CPM door with feed chute, loading fee $50
3379 Located in Canon City, CO --  CPM 201/7000, loading fee $50
3380 Located in Canon City, CO --  CPM century door with knife assembly, loading fee $50
3381 Located in Canon City, CO --  LOT: 3 screener screens, loading fee $50
3382 Located in Canon City, CO --  LOT: Steel loading fee $50, loading fee $50
3383 Located in Canon City, CO --  Hopper bins with legs, loading fee $50
3384 Located in Canon City, CO --  Hopper bins with legs, loading fee $50
3385 Located in Canon City, CO --   Lot: 2 steel stands 8'-6 3/8" X 3'-9", loading fee $50
3386 Located in Canon City, CO --  LOT: Crate of control panels, switches, and motor gearbox, loading fee $50
3387 Located in Canon City, CO --  Horizontal feed hammer hog extreme duty, approximately 100-200hp, loading fee $100
3388 Located in Canon City, CO --  Steel stand, loading fee $50
3389 Located in Canon City, CO --  lOT: Misc Screen frames, loading fee $50
3390 Located in Canon City, CO --  Heavy duty sewing station, loading fee $50
3391 Located in Canon City, CO --  Lot: gear reducer, chain, and sprockets etc, loading fee $50
3392 Located in Canon City, CO --  Lot: approximately 70 screens 30" wide box of carbide hammers for champion hammermill, pluse other misc screens, about (90)hammers 10"×1 1/4" w/ 1 1/4" hole, screens (64) 1/16th 30"×5'. (7) 1/8th 30"×5'. (4) 3/8th  20"×5'. (4) 17 1/2"x3' w/1" holes , loading fee $50
3393 Located in Canon City, CO --  Lot: 12 warehouse racking beams and overhead crane beam, loading fee $50
3394 Located in Canon City, CO --  CPM Screw feeder with motor and drive loading fee $50
3395 Located in Canon City, CO --  CPM Stainless Steel Screw feeder with motor and drive, loading fee $50
3396 Located in Canon City, CO --  CPM Chute with magnet, and guard, loading fee $50
3397 Located in Canon City, CO --  CPM stainless conditioner, no drive, loading fee $50
3398 Located in Canon City, CO --  Sprout Andritz stainless steel feeder conditioner, last running on an Ace pellet mill, loading fee $50
3399 Located in Canon City, CO --  CPM feeder conditioner loading fee $50
3400 Located in Canon City, CO --  Sprout andritz stainless feeder conditoner loading fee $50
3401 Located in Canon City, CO --  CPM feeder loading fee $50
3402 Located in Canon City, CO --  Pellet mill stainless steel conditioner loading fee $50
3403 Located in Canon City, CO --  CPM feeder conditioner with drive loading fee $50
3404 Located in Canon City, CO --  skipped
3405 Located in Canon City, CO --  Feeder with drive loading fee $50
3406 Located in Canon City, CO --  CPM stainless feeder loading fee $50
3407 Located in Canon City, CO --  CPM stainless feeder and conditioner with infeed chute, missing screw, loading fee $50
3408 Located in Canon City, CO --  Sprout 501 Ace door with knife holder loading fee $50
3409 Located in Canon City, CO --  Sprout 501 Ace door loading fee $50
3410 Located in Canon City, CO --  Lot: Misc piping and ductwork 14" Pipe/Duct loading fee $50
3411 Located in Canon City, CO --  501 sprout guard loading fee $50
3412 Located in Canon City, CO --  LOT: Hinged motor base and steel plates loading fee $50
3413 Located in Canon City, CO --  skip
3414 Located in Canon City, CO --  Stand 32" x 32" x 64"tall loading fee $50
3415 Located in Canon City, CO --  LOT: 4 Bliss pulleys loading fee $50
3416 Located in Canon City, CO --  Cement Mixer loading fee $50
3417 Located in Canon City, CO --  LOT: Biss pulley and feed chute, loading fee $50
3418 Located in Canon City, CO --  Bliss SS door to 400hp pellet mill with feed chute loading fee $50
3419 Located in Canon City, CO --  LOT: Bliss pulley guards, loading fee $50
3420 Located in Canon City, CO --  LOT: Bliss 400hp pellet mill frame, roll shells, feed cone, guard/plates, loading fee $100
3421 Located in Canon City, CO --  Sprout 21 pellet mill, missing parts, loading fee $100
3422 Located in Canon City, CO --  Lot: Cartridge for 400hp Bliss pellet mill, large pulleys,  loading fee $50
3423 Located in Canon City, CO --  Chute loading fee $50
3424 Located in Canon City, CO --  Jeffery Rader Bar screener last running cube pellets loading fee $100
3425 Located in Canon City, CO --  LOT: Misc tubing/elbows loading fee $50
3426 Located in Canon City, CO --  LOT: Misc tubing/elbows loading fee $50
3427 Located in Canon City, CO --  LOT: Misc tubing/elbows loading fee $50
3428 Located in Canon City, CO --  CPM 100C pellet mill gearbox, air door, and base, and stand, no internal parts loading  fee $10
3429 Located in Canon City, CO --  75hp motor 440V 1140rpm with 10 groove pulley loading fee $50
3430 Located in Canon City, CO --  LOT: Misc tubing/elbows loading fee $50
3431 Located in Canon City, CO --  LOT: Misc tubing/elbows loading fee $50
3432 Located in Canon City, CO --  LOT: Misc tubing/elbows loading fee $50
3433 Located in Canon City, CO --  Sprout pellet mill base, loading fee $50
3434 Located in Canon City, CO --  LOT: Misc elbow loading fee $50
3435 Located in Canon City, CO --  LOT: Misc ductwork and tubing/elbows, loading fee $50
3436 Located in Canon City, CO --  LOT: (9)14 1/2" round ,(9)19 1/2" round ,(16)14 1/2" round, loading fee $50
3437 Located in Canon City, CO --  Sprout 501 pellet mill base loading fee $100
3438 Located in Canon City, CO --  LOT: Misc ductwork and tubing/elbows, loading fee $50
3439 Located in Canon City, CO --   LOT: Misc ductwork and tubing, loading fee $50
3440 Located in Canon City, CO --  Sprout 501H base loading fee $100
3441 Located in Canon City, CO --  Sprout 501 heavy groove pulley loading fee $50
3442 Located in Canon City, CO --  Lot: 2 chutes/transitions Loading fee $50
3443 Located in Canon City, CO --  Stainless chute for use above pellet mill, loading fee $50
3444 Located in Canon City, CO --  Sprout 501 base, loading fee $100
3445 Located in Canon City, CO --  Sprout 501 base, loading fee $100
3446 Located in Canon City, CO --  Sprout 501 base loading  and stiffner ring loading fee $100
3447 Located in Canon City, CO --  Sprout 501 door and shroud loading fee $50
3448 Located in Canon City, CO --  Sprout  501 base and shroud loading fee $100
3449 Located in Canon City, CO --  Sprout 501HL base and used roll assembly loading fee $100
3450 Located in Canon City, CO --  CPM pellet mill gearbox case loading fee $50
3451 Located in Canon City, CO --  CPM century/roughager SN 188769 pellet mill gearbox case loading fee $50
3452 Located in Canon City, CO --  CPM gearbox case and door loading fee $50
3453 Located in Canon City, CO --  CPM garbox case and base loading fee $50
3454 Located in Canon City, CO --  CPM century gearbox loading fee $50
3455 Located in Canon City, CO --  CPM gearbox case loading fee $50
3456 Located in Canon City, CO --  Sprout 501H pellet mill base with door and extra shroud, missing cartridge, loading fee $100
3457 Located in Canon City, CO --  CPM 200 series gearbox case loading fee $50
3458 Located in Canon City, CO --  CPM Hyflo gearbox case loading fee $50
3459 Located in Canon City, CO --  CPM gearbox case loading fee $50
3460 Located in Canon City, CO --  LOT: CPM 200 series gearbox case and feed chute loading fee $50
3461 Located in Canon City, CO --  Sprout pellet mill door(rough condition) loading fee $50
3462 Located in Canon City, CO --  Sprout Andritz pellet mill door and feed chute (new replacement cost $4900 +2500) loading fee $50 
3463 Located in Canon City, CO --  SS condtioner shell loading fee $50
3464 Located in Canon City, CO --  CPM ss feeder with drive(missing chain) loading fee $50
3465 Located in Canon City, CO --  CPM door with force feeder for 200-300hp pellet mill, loading fee $50
3466 Located in Canon City, CO --  Sprout 501 base, door and door and main pulley shroud, loading fee $100
3467 Located in Canon City, CO --  Blower paddle wheel fan, no motor, loading fee $50
3468 Located in Canon City, CO --  LOT: Sprout pellet mill door and stainless chute loading fee $50
3469 Located in Canon City, CO --  Sprout Andritz stainless feeder conditioner missing motor and some paddles loading fee $50
3470 Located in Canon City, CO --  Rotex 83 SN 24268 gearbox loading fee $50
3471 Located in Canon City, CO --  LOT CPM condtiioner shell and CPM stainless conditioner body with approx 15hp motor, conditioner stainless shell, loading fee $50
3472 Located in Canon City, CO --  LOT: stainless chutes, and cooler panels loading fee $50
3473 Located in Canon City, CO --  CPM feeder, stainless shell with drive loading fee $50
3474 Located in Canon City, CO --  Large CPM pellet mill door for use with 200-300hp door loading fee $10
3475 Located in Canon City, CO --  CPM pellet mill stainless steel conditioner loading fee $50
3476 Located in Canon City, CO --  Pacemaker 100hp  1780rpm 460v 405Tframe with CPM base loading fee $100
3477 Located in Canon City, CO --  skip
3478 Located in Canon City, CO --  Heavy duty product feeder with drive loading fee $50
3479 Located in Canon City, CO --  Sprout stainless steel feeder conditioner loading fee $50
3480 Located in Canon City, CO --  Sprout feeder stainless steel conditioner loading fee $50
3481 Located in Canon City, CO --  CPM 7000 stainless steel conditioner loading fee $50
3482 Located in Canon City, CO --  Marathon 30hp 1765rpm 208-230/460v  286Tframe loading fee $50
3483 Located in Canon City, CO --  CPM pellet mill base and approx 100hp motor loading fee $50
3484 Located in Canon City, CO --  CPM stainless pellet mill conditioner loading fee $50
3485 Located in Canon City, CO --  CPM stainless feeder with motor and drive loading fee $50
3486 Located in Canon City, CO --  CPM feeder and conditioner last running with a CPM century pellet mill, includes motor and reducer for conditioner loading fee $50
3487 Located in Canon City, CO --  CPM large pellet mill stainless conditioner, last runnign with a 7000 size pellet mill, loading fee $50
3488 Located in Canon City, CO --  Sprout feeder and condtiioner last running on a 501 series pellet mill loading fee $50
3489 Located in Canon City, CO --  Large CPM Conditioner with stainless shell and adjustable paddles, loading fee $50
3490 Located in Canon City, CO --  CPM pellet mill conditioner shroud only (stainless) loading fee $50
3491 Located in Canon City, CO --  LOT 2 CPM pellet mill bases and a CPM door with dual knife posts loading fee $50
3492 Located in Canon City, CO --  CPM pellet mill base loading fee $50
3493 Located in Canon City, CO --  CPM DS Series pellet mill base gearbox and door loading fee $50
3494 Located in Canon City, CO --  CPM 200 series pellet mill  mill gearbox loading fee $50
3495 Located in Canon City, CO --  CPM master pellet mill  gearbox/parts machine loading fee $50
3496 Located in Canon City, CO --  CPM roughager /century pellet mill no door loading fee $50
3497 Located in Canon City, CO --  CPM pellet mill motor with gear last running on a master pellet mill loading fee $50
3498 Located in Canon City, CO --  CPM 16 pellet mill with door, no motor loading fee $50
3499 Located in Canon City, CO --  LOT 2 sets of CPM Die clamps, force feeder with drive, rolls, and shells loading fee $50
3500 Located in Canon City, CO --  CPM master pellet mill, missing mainshaft assembly and door loading fee $50
3501 Located in Canon City, CO --  cpm feeder stainless steel screw and stainless shell no drive, loading fee $50
3502 Located in Canon City, CO --  Lot: pellet mill clamps, feed cones, and misc parts loading fee $50
3503 Located in Canon City, CO --  CPM stainless feeder and condtioner last running on a century size pellet mill loading fee $50
3504 Located in Canon City, CO --  Lot: 5 sprout 501 die housings, (new replacement cost $9000 each) loading fee $50
3505 Located in Canon City, CO --  Lot: conveyor belting rolls, cog drive belts etc loading fee $50
3506 Located in Canon City, CO --  Pellet mill force feeder with motor (new replacement cost $6900) loading fee $50
3507 Located in Canon City, CO --  Sprout 501 pellet mill force feeder with motor, (new replacement cost $6900) loading fee $50
3508 Located in Canon City, CO --  LOT: (1)Reliance 40hp 3560rpm 460v 0324TSframe (1)Reliance 50hp 3560rpm 460v 0326TSframe Loading fee $50
3509 Located in Canon City, CO --  LOT 4 motors: (1)Baldor 1.5hp 1725rpm 208-230/460v 56Cframe (1)TEFC 1hp 1735rpm 230/460v 143Tframe (2)? loading fee $50
3510 Located in Canon City, CO --  LOT of 3 motors and 2 reducers : (1)TEFC 1.5hp 1745rpm 230/460v 145t frame (1)WEG 3hp 1170rpm 213t frame (1)Leeson 1hp 1725rpm 208-230/460v 56C frame loading fee $50
3511 Located in Canon City, CO --  Large electric motor approx 100hp loading fee $100
3512 Located in Canon City, CO --  Lot: pallet of 5 motors approx 1-2hp loading fee $50
3513 Located in Canon City, CO --  Lot: Motors and motor gear reducers - 3hp reliance motor/reducer, 1/2hp motor reducer, reducer loading fee $50
3514 Located in Canon City, CO --  LOT: Motors with pulley and reducers: (1)Reliance 40hp 1770rpm 230/460amps 324t frame (1)GE .5hp 1725rpm 208-220/440v (1)GE .5hp 1725rpm 208-220/440v  loading fee $50
3515 Located in Canon City, CO --  Sprout 21" door and force feeder loading fee $50
3516 Located in Canon City, CO --  CPM hyflo pellet mill with 50hp motor, parts machine missing mainshaft assembly, flange, and change parts. loading fee $50
3517 Located in Canon City, CO --  Newman 150hp 1770rpm 460v 509 loading fee $100
3518 Located in Canon City, CO --  U.S. Electric 150hp 3565rpm 460v 445TS loading fee $100
3519 Located in Canon City, CO --  U.S. Electric 125hp 1775rpm 460v 444T loading fee $100
3520 Located in Canon City, CO --  Electro Dynamic 100hp 1755rpm 220/440v 10  groove sprout pulley 505 frame loading fee $100
3521 Located in Canon City, CO --  U.S. Motor 100hp 1200rpm 440v 587 loading fee $100
3522 Located in Canon City, CO --  Weg 50hp 1770rpm 280-230/460v 326T loading fee $50
3523 Located in Canon City, CO --  Reliance 50hp 1770rpm 230/460v 326T loading fee $50
3524 Located in Canon City, CO --  GE 100hp 1185rpm 550v 584 loading fee $500
3525 Located in Canon City, CO --  Induction Motor 10hp 1175rpm 206-220/440v 284U loading fee $50
3526 Located in Canon City, CO --  Baldor 100hp 1175rpm 575v 405T loading fee $100
3527 Located in Canon City, CO --  Sprout feeder and condtitioner stainleess steel loading fee $50
3528 Located in Canon City, CO --  CPM feeder with stainless shell and screw with approximately 2hp drive  loading fee $50
3529 Located in Canon City, CO --  Lot: Lincoln 100hp 1765rpm 230/460v, Teco-Westinghouse 10hp 1765rpm 230/460v, 10hp 1755rpm 208-230/460v loading fee $100
3530 Located in Canon City, CO --  Morse 100hp 1765rpm 208-220/440v 445U loading fee $100
3531 Located in Canon City, CO --  GE 100hp 1770 rpm 440v 504S loading fee $100
3532 Located in Canon City, CO --  Baldor 100hp 1175rpm 575v 405T loading fee $100
3533 Located in Canon City, CO --  Marathon Electric 125hp 3550rpm 460v 404TS loading fee $100
3534 Located in Canon City, CO --  North American Electric 100hp 1785rpm 208-230/460v 405T loading fee $100
3535 Located in Canon City, CO --  Marathon 150hp 3550rpm 460v 405T loading fee $100
3536 Located in Canon City, CO --  General Electric Motor 100hp 440v 3600rpm loading fee $100
3537 Located in Canon City, CO --  US Motor 150hp 1200rpm 460v Fr 1585 with pulley loading fee $100
3538 Located in Canon City, CO --  Toshiba 200hp 1780rpm 460v 447TZ loading fee $100
3539 Located in Canon City, CO --  Reliance 150hp 1780rpm 460v 445T loading fee $100
3540 Located in Canon City, CO --  Large motor approximately 250hp loading fee $100
3541 Located in Canon City, CO --  Worlwide electric 230/460 100hp 60Z loading fee $100
3542 Located in Canon City, CO --  LOT: misc steel parts loading fee $50
3543 Located in Canon City, CO --  Evans 200hp 1700rpm 460v 108S Loading fee $100
3544 Located in Canon City, CO --  US Motor 200hp 1800rpm 440v loading fee $100
3545 Located in Canon City, CO --  Marathon 200hp 1190rpm  447/449T460V loading fee $100
3546 Located in Canon City, CO --  Westinghouse 250hp 1785rpm 460v loading fee $100
3547 Located in Canon City, CO --  Siemens 250hp 1185rpm 460v 449TS loading fee $100
3548 Located in Canon City, CO --  Westinghouse 200hp 1180rpm 460v loading fee $100
3549 Located in Canon City, CO --  Allis 250hp 1790rpm 460v loading fee 507US loading fee $100
3550 Located in Canon City, CO --  Allis 250hp 1785rpm 460v loading fee $100
3551 Located in Canon City, CO --  Pacemaker 250hp 1785rpm 230/460v 449Z  loading fee $100
3552 Located in Canon City, CO --  Reliance 300hp 1725rpm 460v 449T loading fee loading fee $100
3553 Located in Canon City, CO --  Toshiba 200hp 1180rpm 460v 505UZ loading fee $100
3554 Located in Canon City, CO --  US Electric 150hp  1200 rpm 460v, loading fee $100
3555 Located in Canon City, CO --  Worldwide 400hp 1789rpm 460v 586/7T Yr-2004 loading fee $100
3556 Located in Canon City, CO --  Feeder with drive, stainless last running with a CPM pellet mill loading fee $50
3557 Located in Canon City, CO --  LOT: motors: (1) Baldor 1.5hp 1725rpm 208-230-460v 145tc frame (1)Toshiba1.5 hp 1740rpm 230/460v 56c frame (1)Baldor3hp 1725rpm 208-230-440v 213  720m frame, gearbox with sprocket loading fee $50
3558 Located in Canon City, CO --  LOT: CPM pellet mill stainless back plate with steel covers and plates loading fee $50
3559 Located in Canon City, CO --  LOT: Reliance 1hp 1725rpm 230/460v R56 frame, with gear dirve and metal frame loading fee $50
3560 Located in Canon City, CO --  LOT: Base last running on a century pellet mill, and a feeder conditioner last running on a cpm pellet mill, loading fee $50
3561 Located in Canon City, CO --  LOT: Bin of stainless feed chutes, slides, boxes etc loading fee $50
3562 Located in Canon City, CO --  Lot: motor fan guards loading fee $50
3563 Located in Canon City, CO --  Lot: Motor fan guard parts etc loading fee $50
3564 Located in Canon City, CO --  LOT: Stiffener ring, plates, etc for sprout or similar pellet mills loading fee $50
3565 Located in Canon City, CO --  LOT: Crate of pellet parts including hoist, coupling, magnet, shear pin outer casting, belts etc, loading fee $50
3566 Located in Canon City, CO --  hammermill guards, misc steel parts, die clamps loading fee $50
3567 Located in Canon City, CO --  Conditioner for CPM pellet mill, stainless steel shaft, like new adjustable paddles, and steam diffusing loading fee $50
3568 Located in Canon City, CO --  Sprout Andritz stainless steel feeder / conditioner with adjustable paddles with approximately 15hp motor loading fee last running animal feed $50
3569 Located in Canon City, CO --  LOT: CPM pellet mill door and bearings, loading fee $50
3570 Located in Canon City, CO --  Die pallet type jack for pellet pellet mill dies loading fee $50
3571 Located in Canon City, CO --  LOT: Stainless screws, stafts, etc, loading fee $50
3572 Located in Canon City, CO --  LOT: pulley, steel plates, feed cone , boxes, steel nut, loading fee $50
3573 Located in Canon City, CO --  LOT: 2 Pallets Misc CPM parts including: die clamps, bolts, coupling parts, rolls assemblies,(feed cone not included) etc loading fee $50
3575 Located in Canon City, CO --  LOT: CPM die clamps, hammermill screen, cog belts, etc loading fee $50
3576 Located in Canon City, CO --  Lot: Misc CPM Parts Primarily for century pellet mill including: die clamp bolts, shear pins, scrapers, roll shafts, spools of wire, shafts, coupling parts, misc steel etc loading fee $50
3577 Located in Canon City, CO --  Lot: misc wire tubes, wires, straps, electrical, rope etc, loading fee $50
3578 Located in Canon City, CO --  Lot: Misc flanges, guards, mild and ss steel, pellet mill and hammermill parts etc, loading fee $50
3579 Located in Canon City, CO --  CPM Century die, approximately 1/2 square cubes, surface rust but appears new/never used, loading fee $50

 

 

AuctionServices